PDA

View Full Version : noob question what is the nut called that adjusts the chain on a 1985 atc 350x



jrock454
12-26-2018, 08:13 PM
what is the nut called that tightens your chain on a 1985 atc350x bearing carrier

Shep1970
12-26-2018, 08:43 PM
Um, hmmm- like what my finger is pointing at? It’s part of the bearing carrier itself.
(Not a 350x swingarm) but there very similar in style.
256308

Shep

jrock454
12-26-2018, 08:46 PM
yes what is that called

Shep1970
12-26-2018, 08:50 PM
yes what is that called

Really???



Ps- “bearing carrier” :)

jrock454
12-26-2018, 08:55 PM
have you ever seen a 85 350x

jrock454
12-26-2018, 09:00 PM
where you put the wrench to tighten the chain is broke halfway would i have to buy a new bearing carrier

Shep1970
12-26-2018, 09:04 PM
have you ever seen a 85 350x
Yup- doesn’t it have 5 wheels? Or 6
If u don’t like my answer, that’s ok- I really don’t have the patience to argue w/you at the moment.

Shep

jrock454
12-26-2018, 09:20 PM
hey i wasnt arguing with you i was asking have you ever seen a 1985 350x because the 86 uses the pry method it has holes in it and the 85 uses the wrench method sorry for the confussion

Shep1970
12-26-2018, 10:32 PM
hey i wasnt arguing with you i was asking have you ever seen a 1985 350x because the 86 uses the pry method it has holes in it and the 85 uses the wrench method sorry for the confussion

The carrier is a one piece cast part- just be sure to get the correct yr for a replacement, there’s aftermarket ones I’ve seen but you’ll need to investigate if there’s any better/worse brands to buy.
It’s just been a long couple days/ I probably shouldn’t have responded at all.
There’s a good group of guys here-really

Shep

Ranvier
12-26-2018, 11:29 PM
hey i wasnt arguing with you i was asking have you ever seen a 1985 350x because the 86 uses the pry method it has holes in it and the 85 uses the wrench method sorry for the confussion

I own both and use a brass punch and some gentle tapping on both.