PDA

View Full Version : 1982 honda atc 185s issue



jeffswheeler86
02-02-2019, 07:04 PM
1982 Honda ATC 185s wouldn't start, even after checking everything i could plugs wires etc. rebuilt the carb with a Honda rebuild kit and everything went back together the way it was Taken apart, she starts but now it has a very high idle. anyone with experience or knowledge of these have any advice or suggestions?

22R
02-02-2019, 07:36 PM
Check linkage/ slide and idle screw is turned out. Ensure no air leaks on carb to intake.

22R

red hat
02-06-2019, 03:40 PM
Is the slide for the carb put in the proper way?
Is your idle set screw to tight?
Is your spark plug new?

I had this same issue, cleaned and disassembled the carb countless times, ending up rebuilding it and it continued , I bought a new spark plug and it cured it 100%.