PDA

View Full Version : New here and I need help!!



Seanatc200x
01-16-2020, 02:30 PM
I recently acquired a 90/110 hp atc trike. Almost complete! I just need some help identifying certain parts like the forks and front huh setup. 261292261293

shortline10
01-16-2020, 05:36 PM
Front hub looks stock to me with a disk welded to it .
Triple clamps look like HPATC , forks are possibly 82 ATC250R .
Awesome score BTW , very rare frame .
Got a picture of the other side :)

Seanatc200x
01-16-2020, 07:03 PM
I noticed that it is a stock hub but it’s not welded it’s bolted to that plate. That plate is drilled to fit a 12 inch wheel I think from a bw or tri z. I don’t think they are early 250r forks from the pics I’ve seen online. They look very similar to rd250,350,400 forks. I found a picture of one of their ads and it says 34mm triples fit those three forks. And thank you not bad for 20 bucks!!

Joseph Farrow
01-16-2020, 11:00 PM
Yes definitely a great find @ $20.
Front hub looks to be aftermarket. Possibly a Dickson but 90/110 stuff. Triples look to be HPATC to match the frame. Odd it has a drum brake set up on the rear.
Motor looks to have mods as well with allen bolts and crank case breather. I'm with Mike. Lets see pics from the other side. Appears to be an old duner.