Sperdue
03-31-2020, 10:34 AM
I had some teeth break off of my starter gears. I removed the gears and she still ran. I noticed there was a small groove in my stator where a hunk of metal had got stuck to my flywheel. The flywheel was scratched too but I sanded it down to get the rough edges out. The stator is damaged but it ran like this. After replacing my gear shifter shaft and put covers back on, now I have no spark and won't start. I plan on testing the stator with my meter first. Wouldn't the starter still turn over though? The neutral light doesn't come on either. I only rode this thing like 3 times before I tore it apart but I can't remember if the light worked or not. I think my next actions will be testing with the meter, starting at the stator, then cdi, igniion etc. Hopefully I can figure out how to use this meter and track down the problem. Could my stator just have went bad all of a sudden?