PDA

View Full Version : Hello from Canada



1984Honda200
04-27-2021, 10:02 AM
267463
267628

Hey everyone I just purchased this trike the guy told me it's a 1984 honda 200s chain drive no reverse or high and low , can anyone confirm this for me ?? Cant wait to get involved with this scene never had as much fun riding as I do with this trike !!

coolpool
04-27-2021, 10:20 AM
Welcome fellow canuck! Check the front steering neck for a tag that should have the year and model on it. There's a VIN decoder link on the home page of this forum too. If the tag is missing, the VIN should be stamped on the frame around the neck also.

1984Honda200
04-27-2021, 11:34 AM
Thank you , coolpool ! Very good to know about that VIN checker here on the website I will have to check the frame and see if I can find where its stamped just hoping to confirm the year and model for when I need to get some parts , are most years and models for these ATC's compatible for parts ? Great to be apart of the community !

350for350
04-29-2021, 07:36 AM
Going by your description, it sounds very similar to a 200S. I can't see an electric starter in your picture. If it has one, it's a 200M. A 200M also has a stock tires size of 25x12-9 while the 200S has a stock tire size of 22x11-8. Another way to tell is the 200S has rear fenders that come off in one piece. A 200M has rear fenders that have a separate left and right side.

1984Honda200
04-29-2021, 11:12 AM
Okay , so based on what your telling me it almost seems like this trike has some parts from a 200m and 200s on it , as its pull start but the tires are 25x12-9 on the back and it has an 8 inch rim on the front , also the rear fenders are separate right and left not a one piece , slowly finding out more about this ATC , very appreciative of your guy's knowledge on these rigs still have lots to learn !

350for350
04-30-2021, 08:22 PM
Another possibility is that it's an ATC200. The last year for this model was 1983. They were like the 200M, which is basically the same machine with the e start. 25" tires, pull start only, separate rear fenders. Somebody may have put a different front rim and tire on it. Of course you may be right and someone put the entire front end from a 200S (for example) on your trike.

70Javelin
06-27-2021, 12:38 PM
Hey guys, another Canucks here. I live just outside of Ottawa (Mountain Ontario). Just wondering where you're from and where you ride. I have an 85 250SX that I've restored and it runs like new. I recently got an ownership and a plate. I was also able to get insurance. Just looking for fellow riders in the area.

coolpool
06-30-2021, 12:29 AM
Welcome 70Javelin! Probably best to start your own thread as you'll get a better introduction....and as always, folks want pictures.:naughty: