block of kit nessacery to remove oil injector on a blaster??

[timex69]

Hey
I think i read somewhere that you dont need a block off kit to remove the oil injector on a blaster, i herd u just reuse some part that you take off. Can someone walk me through how you do this. Thank you

[firebird13601]

the block off kit is not neccesary,,just take the gear off of the pump and leave the pump in. If you want to take the pump out you will need the block off kit..

[Honda300ex]

you can also cut part of the hose off and just shove a bolt in it with some silicone on it in there. YOu have to pull the clutch cover to get that gear out to make the oil pump not turn anymore. I did it on my blaster.. it wasnt very hard at all.

[Beer_Smurf]

Sure, I guess you could just take the gear off.
However taking the clutch cover off is the biggest part of it.
A blockoff plate is not a big deal.
When you get the clutch cover gasket, just get the oil pump gasket also.
Then just cut a piece of metal to the pattern of the oil pump gasket and screw it on.
Might as well do it while you have it apart.

[daputz]

here you go

http://hollywooddirt.proboards20.com/index.cgi?board=bikes&action=display&num=1080146250