PDA

View Full Version : ... The finished product



Wickedfinger
12-22-2002, 10:56 PM
I finally got around to finishing off my restoration of the '91 TRX250X today. I put on some Honda decals from Sticker Point. They are really high quality laser cut vinyl transfers. I've used them quite alot before and they always come out yards ahead of the crappy OEM stuff that ends up peeling off in a month.

ATCRYDER
12-22-2002, 11:40 PM
I really like that thing---Great Job, Tejas.

SO hows the top end & acceleration on that baby???

Rob

HemiChallenger71
12-22-2002, 11:47 PM
One does not buy a 250X really for performance. I thin kthe performance of a 250X is comparable to a 200X. They are reliable, and have reverse, thats what matters.

ATCRYDER
12-22-2002, 11:49 PM
Heres one with the best bolt in mod available!!

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6724&item=1875272849

Big Darn Mike C
12-23-2002, 05:37 AM
Nice quad, that thing looks like fun to rip around on

350Xrider
12-23-2002, 02:36 PM
Thats a thick ass seat :o Those bikes are realy fun little trail bikes, I almost wouldn't mind having one just to mess around on.

Billy Golightly
12-23-2002, 05:49 PM
Very nice work as always Tejas. Can't say the same for that 250R powered 250x though :shock: Look how the exhaust runs under the footpeg, yikes!

skippy
12-23-2002, 08:38 PM
how about slapping a 250r front end on it? to widen it out a bit... nice job w it...my buddy is selling his 88 250x, runs like a top, wants 1300.00 for it... in maryland..

Wickedfinger
12-24-2002, 12:34 AM
... Here's a before pic ...... The top end of the power band didn't change much when I put the Uni-filter and the T-4 exhaust on it .. but .. it really woke up the low/mid range and she pulls wheelies through 4th nicely now. I'll ride her for the rest of the winter then sell her for something else to work on. My next project is to get my free 225DX going - if anybody has any experience in changing out the swing-arm bearings on them let me know - it looks like a beyotch with the shaft drive and all - its the only thing thats been holding up its resto.

sean8231
12-30-2002, 11:55 PM
225 swingarm bearings arent all that bad to do, the hardest part is putting the swingarm back on, and getting the drive shaft in right, that was a pain... The bearings themselves are really easy, they are tapered, and fall right outare you sure its the bearings??? I though the bearings were bad in my old one, but they werent, it ended up being the pivots(cant remember what their called) were worn, they were like $10 a piece...

jeswinehart
12-31-2002, 01:57 AM
hey wickedfinger,,, if you would,,, go to trike section and give waterfowler info on those decals (who to contact).

i'm gonna be needing some myself soon for my x project.

thanks,,,,,,, john

p.s. --- nice quad !

Wickedfinger
12-31-2002, 03:29 AM
.... the Decals are directly from Dennis Kirk ... about as simple as you get.

Wickedfinger
12-31-2002, 03:33 AM
.... oh and another thing, as with all vinyl transfer type decals, when you're applying them, only rub on the decal and not on the whole "sheet" part of the transfer .... trust me, you'll thank me later.