got my stang to the track!!!

[200x Basket]

it hauls AZZ!!!!

http://www.corral.net/photopost/data/500/10588100_0482-med.JPG

[smokinwrench]

Looks fast. Do you still have the old chevelle?

[200x Basket]

it was a chevy II and i sold it. i wanted a street car :) so i could kick ass 7 days a week. OH, it is VERY fast. :Bounce

[smokinwrench]

So how fast is it in the 1/4?

[Derrick Adams]

Oh, You have one too.....

[42F67N]

what did it run?

[200x Basket]

it ran a 7.52 in the 1/8th on motor. i have a N2O kit fit it but it will be a few weeks before i try it out. I have a 418 stroker going in next month. I am waiting on my custom headers and carb :) it will be running 9's in the 1/4 after that

[200x Basket]

Oh, You have one too.....

nice car. do you have more pics? are you member on www.corral.net? where are you located?

[yamaha200E]

you shouldnt of sold the chevy lol. nice car though

[TALLSUP]

it hauls AZZ!!!!

http://www.corral.net/photopost/data/500/10588100_0482-med.JPG
well what did it run and what are the 60 foot times

[200x Basket]

read the post above. it ran a 7.52 with a 1.74 60 foot time. it was a dog out of the hole

[TALLSUP]

what trans and gear are you running

[200x Basket]

c4 with 3.73 gears. it is set up for the 1/4 but i have not had it to a 1/4 track yet.

[200x Basket]

here are some of the specs
351w
.614 solid roller
vc jr heads
vc jr intake
msd ignition
1 3/4 headers
3" exhaust
gary williams 750 DP
4000 rpm stall
c4 with a transbrake
wolfe racecraft roll age and rear suspension
tubular front suspension

[200x Basket]

this is what it looked like 2 months ago!!!

http://www.corral.net/photopost/data/500/10588100_0234-med.JPG

[threewheelin-feelin]

my uncle has a 67ss camaro drag car with a full hand made fram and roll cage. its all metal inside and has plastic windows. it has a 427 big block bored 60. and a th 400 trans .it will run low 9's hi 8's in the quarter its also sitting 3 inches off the ground. hahahaha its sweet.

[TALLSUP]

yo 200x you said your car is set up for 1/4 mile but 60 ft is 60 ft in 1/4 mile
or 1/8 mile your car needs more gear how tall of a tire are you running and how much converter are you running and how much chip do you have in your 2 step?????

[200x Basket]

yo 200x you said your car is set up for 1/4 mile but 60 ft is 60 ft in 1/4 mile
or 1/8 mile your car needs more gear how tall of a tire are you running and how much converter are you running and how much chip do you have in your 2 step?????


60' is the same in the 1/8 or 1/4 so you have me confused there. it is set up for the 1/4 mile. i can only turn 6500 rpm on the 351w so i run a 28" tall tire and 3.73 gears. i set the gears up for the 418. the 351w is just a junk engine that i plan to use until july.

you cant run more gear if you cant spin your engine to 7500 rpm. you have to balance it. here is a good equation for you


...COMPUTE THE IDEAL 1/4 MILE PASS...

Elapsed Time X MPH = 1335

Examples:

13.35 x 100.00 MPH = 1335

12.00 X 111.25 MPH = 1335

If the factor is more than 1335, add more rear gear.

If the factor is less than 1335, reduce rear gear.

[TALLSUP]

Well what im trying to say and please dont be offended but your 60 ft times are lazy 351 or 418 you still do not have the HP to pull the 3.73 gear,so as it stands if you had more gear and not knowing what your converter is your 60 foot would pick up so I would try a 430 gear

[trikerider2oo7]

other than its an egg sucker, its pretty nice. me and my stepdad are currently restoring a 67 nova...it is awesome

[200x Basket]

not offended but you do not seem to unserstand my whole combo. yes a 4:30 would pick the 60 foot up but i would be bouncing off of the rev limiter the last 200 feet int he 1/4 mile. the 60 foot is lazy right now but i have a low HP engine. hell i run it on 87 octane. it is only 9:1 compression. i have ran cars from 8.20 in the 1/4 to street cars like this, so i know there is is lots of progress to be made.

[TALLSUP]

it just seems odd that that motor turns 6800 with a 3.73 and a 28 inch tire,
you never said what converter is in it,it sounds like you were a chevy guy
so you could build a nice little 5.7 rod 406 chevy motor and and put it in that ford, around here people call me a bottle baby so I got a shirt made that says
ALL THROTTLE AND A LOTA BOTTLE people say its cheating but all is fair in street racing,do you know what carb you are going to run on the other motor

[200x Basket]

i am a race car guy (not chevy, ford, or dodge). my last car was a 86 notch back with a 347. before that i had a tubed chassis 67 nova with a 565 big block on alcohol with a enderle injection. i build a new car every two years as a hobby.

the RPM limit on this engine is 6500 rpm due to the 3" mains. the 418 will be limited to the same RPM just to be safe. I also like the bottle and had a custom cam ground by Ed Curtis at www.flowtechinductions.com to fit my combo. i will be running a holley 950 HP 4150 series from www.flowsystems.com

[TALLSUP]

we did a 66 chevy 2 a few years back had 33/22.5 hoosiers 482 alluminum
head,roller BDS 671 with a bird catcher on alcohol did not work out to good on the street, yes when holley came out with the HP carbs I bought a
1000+ I was always a dominator guy until I got that HP carb I think they
are close to injection as you can get in a carb,Just where are you located

[200x Basket]

i am in jacksom ms

[200x Basket]

here is my 67 chevy II nova

http://www.boomspeed.com/christiger/c6.jpg

that is a good friends 9 second "street car" behind me. running a boss block 347 with a roots style blower :Bounce

http://www.boomspeed.com/bad67chevyii/chrisandkerriattrack.jpg

[trikerider2oo7]

cool nova...i took some pics and will get them up tonight

[200x Basket]

this nova ran a 5.37 at 127 mph in the 1/8th with a 1.18 60' time on 32x17 slicks!! that was a blast but it wan not a street car. it would burn 4 gallons of alcohol in 5.3 seconds :)

[threewheelin-feelin]

holy shnit that 67 nova is sweet i want to get some pics of the chevelles camaro and elcamino we gots