84honda 200X
08-09-2004, 10:33 PM
Hey guys i just got this old CJ 3A mounted on a International Scout 2 frame with the motor and tranny. My problem is i got it from my dad and we got it running again and i finally got it to run good enough to go fourwheelin in. Well the tranny transfer case and rear axle had water in the oil so we let the water out and a week after that i replaced all the oil except for the motor which i will get to tomorrow. Now the tranny has a slow leak from the bottom cover we have torqued the bolts as tight as we can get them and it still leaks now im going to take the skid plate off tomorrow and a buddy and me are going to torque them tight and see if that gets rid of the problem.
Suggestions would be very apreciated.
Suggestions would be very apreciated.