84trx200 carb help!!!

[84trx200]

I am rejetting my carb the original jet was a 98 and i have a 108 in it. It will start but only with the choke on when i turn it off it dies. The air screw is set to 2 screws out and my pilot is at 2 1/4 turns out and i have the e-clip on the 3rd notch.Any suggestions?

[350x'inNY]

98 to a 108 is a HUGE jump! Whatelse have you done to it to require that change??

[84trx200]

new air filter no air box lid and i took all the internal parts out of my muffler.

[Quickonstep]

that sounds like a huge jump.. did you need to do it or did you just take some advice? read your plug, and jet appropratly.

Jesse

[84trx200]

i took sum advice from a guy that has worked on them all his life and has 1 of his own.

[84trx200]

i also have a wiseco high compression piston for it but i havent installed it yet.

[84trx200]

by the way when i put the 98 back on it it wouldent start unless i gave it gas and it also wouldent idle.