Mustang

[faf_racing]

Who has an 88-93 mustang on here? or does anyone know a good site for these? I need some parts.

[Derrick Adams]

Half the guys on here have Mustangs, including me.
Check out www.stangnet.com or www.corral.net
both are great for used parts!
Also, you may want to come to the All-Ford swapmeet next weekend at Columbus, Ohio fairgrounds. Largest all ford swapmeet in the world. (Really) 4 indoor buildings full of parts, some outdoor venders, car corral, you need it, it's there! April 2-3.

[1984kxtTECATE]

What type of parts, Drive train, exterior, interior??

[faf_racing]

interior and a couple exterior parts so i can get it painted, the exterior is marroon or burgundy,and interior is red with black stiching in the seats, this is an 88 gt im talking about. as far as exterior im needing the lower left ground effect infront of the drivers side tire.

[1984kxtTECATE]

Sweet, You could go get on of 5.0 magazines at the store, they seem to have a ton of links to these items, Im not sure of the full title of the magazine but if you look around you will find one, what color are you going with??? Candy Apple Red is pretty sweet, I have pics of my 65 coupe painted it if you are intrested in seeing it.

[faf_racing]

yah definatly post i love old stangs

[1984kxtTECATE]

Digital Camera Picture, the quality is low but it works
http://img.photobucket.com/albums/v648/84tecate/MichaelsCar017.jpg

http://img.photobucket.com/albums/v648/84tecate/MichaelsCar015.jpg

http://img.photobucket.com/albums/v648/84tecate/MichaelsCar018.jpg

I have more that are of better quality, but they are on my moms computer, Anyways the lighter shades of Red on the car is actually more of a silver but with a digital camera, it is hard to make out the colors.

[faf_racing]

what motor is going in it a 289? that will be sweet when finished i used too have a couple 68 coupes, i really miss them too.

[1984kxtTECATE]

what motor is going in it a 289? that will be sweet when finished i used too have a couple 68 coupes, i really miss them too.

347 Stroker or I will build up a race 302.

[faf_racing]

what type of tranny 4spd? thats what id want or a 5spd if i could get it too work.

[faf_racing]

this is one of our cars 88 chrysler conquest, its off the subject but i was playing with the attachment too see if i could get this too work, and now that i know how ill get a pic of my new stang up sometime.

[1984kxtTECATE]

I am gonna stick with a TCI C4 Tranny built for 450hp, post pics of the stang :naughty:

[rob0781]

www.allfordmustangs.com

[Derrick Adams]

Here's a few of mine i've built over the years.
The first one is actually a 1986 GT that I rebodied to a 92 GT. I installed a 6pt cage and threw in a hopped up 5.0. I went 13.30's with this car on radials.
Second one is an 86 coupe. This one had a 429CJ in it with a C6. It ran 12.40's without much trouble. Fun car but not too corner friendly!
Third car is one I built after the first one got totalled( got rear-ended turning into the track :( ). This one is an 84 T-Top Coupe (Super Rare!) I rebodied it to an 87, same 5.0/5-speed combo. I went 12.30's with this car. (This one also got a photo shoot from Muscle Mustangs & Fast Fords, but never appeared in the magazine. :rolleyes: )

Amazingly enough, I don't have any pictures of the latest one. I'll have to drag it out and do that sometime.

I've had several more, this is just a few I could find pics of easily!

[TECATE CRAZE]

Hey... I have a 1987 black 5.0 notchback .

[LaDano]

I've got a '97 convertible, mustangworld is a good site also. Theres a place out of Georgia that has a lot of good parts, prices are reasonable and shipping want break the bank. Its on a few of the sites mentioned here.

[Tri-Z Pilot]

www.50resto.com is a great place for fox body parts. Mine is just about done. 88 roller lifter motor swapped over to a holley stealth intake with a holley 750cfm 4bbl, holley blue fuel pump, some kind of shorty headers, 5speed with ram clutch and 373 gearing, and patriot glasspack chrome sidedumps. Now that the driveability is pretty much done, I will need to turn to the body. (body is pretty much dent free, but the paintjob is shitty). Will get pics asap.