View Full Version : For you Camaro Fans...
http://img95.exs.cx/img95/4776/camaroz285vg.png
this is my friends 1984 camaro z28.....thought you people (like me) would like to see it :) the white blur on the tali lights is becuse someone spilled water on the picture, it was a scan :\.....any questions just ask! i help'd him build it :p
1984kxtTECATE
03-28-2005, 02:13 AM
I see a red X
....SOB....give me a minunt to get this fixed it was working...stupid POS
EDIT: there now it should work....i hate computers haha :beer
1984kxtTECATE
03-28-2005, 02:23 AM
That is freakin badass, what motor and mods does it have, that is some eye candy right there.
-its a 350 small block 4 bolt main(of course)
-stock 350 cast iron crank
-flat top pistons(9:5:1 compression)
-mild race cam(dont have exact lift specs on me)
-ported LT1 heads
-edelbrock performer RPM intake
-750 race demon carb
-that nice air filter on the top :)
-edelbrock headers
-custom sidepipes that get fed right off the open headers it has a cut off valve so he can run the open side pipes or through the street exaust...needs the reg exaust so the cops dont hassle us
-big rad and water pump..haha
-hughes compitition race trans with a 3500 rpm stall, and a trans brake
-B&M pro stick reverse lock out shifter
-9 inch ford rear end with discs-3.70's for cogs
-MT sportsmans front and rear mounted on centerline warrior mags
-cromed to THEE nuts
-custom paint job, its actually a deep sparkly red in the light, all house of colours paint....14 layers of paint...really is a hassel becuse its so thick it chips really easy
-2 or 3 thousand watt stereo...cant remember..haha pioneer deck
-sub rail connectors...of course
-custom bucket seats with 5 pt harness
-roll cage
-shaved door handels(might be puttin thease back on cuse they wont let him drag race without a manuel latch)
-custom tail lights made by him....they are not covers
-cant think of at the moment......oh wait the sun roof...
im gona get more better high res pics once the snow melts and we can take it out and get her cleand up... :beer
1984kxtTECATE
03-28-2005, 02:41 AM
Dang sounds like the plans for my stang, except it will be a roadracer, any way definatly get some better photos, I would love to see the paint job, I to have the house of kolors paint, it is awesome looking. I would love to see it pull up to a ricer.
Dang sounds like the plans for my stang, except it will be a roadracer, any way definatly get some better photos, I would love to see the paint job, I to have the house of kolors paint, it is awesome looking. I would love to see it pull up to a ricer.
oh yea and i forgot to mention somehow that it puts out 450 hp hehehe, we have killed every single pice of **** ricer rocket everything in town hear....rice cant even come close to touchin this thing.....we take off and the rice is lost in a puff of tire smoke haha
twgranger
03-28-2005, 09:56 AM
That is a nice car. I had an 84 before but not as nice as that.
Pistonhead
03-28-2005, 02:38 PM
Damn thats a nice rig man!!! I been waiting to see that one for a while, looks just as nice as you said!
cliff2302
03-28-2005, 03:15 PM
nice car, but i dont think it puts out 450 horses with the setup you described. Its nice to see young people like me going for american muscle rather than imported noise machines.
1984kxtTECATE
03-28-2005, 03:33 PM
nice car, but i dont think it puts out 450 horses with the setup you described. Its nice to see young people like me going for american muscle rather than imported noise machines.
I think it has it, dosnt matter any way, you can have 350 horse power with a 3000 rpm stall converter and it will flat launch off the line, and he said he has a transe brake, uses the reverse valve on the valvebody to reroute the trans fluid, any way, you can launch it at any rpm you want. So its gotta be freakin quick off the line. I will only drive 60/70's muscle and pony cars, i dont want to ride around in cracker jack toy.
its 450 horsepower at the crank, had it on the dyno, not sure what it puts to the ground becuse there are no full body style car dynos around hear that are open to the public, but i tell ya with that trans brake it just go's any rpm ..its wicked
Pistonhead
03-28-2005, 09:15 PM
Round here me and my buds like to grind the rice machines into the ground with bad lifted trucks and classic/60's-80's muscle cars. One of my buddies has a 1982 big block powered chevy wagon that hits the ricers real bad. My other buddy has a 67 camaro, I have a K20 that I'm lifting and putting some speed parts on, and my other buddies also have interesting works in progress too.
i have yet to pick up a truck/hot rod yet heh,,,soon tho i get my lincese in dec will prolly be a chevy truck of course :D
cliff2302
03-29-2005, 04:03 AM
Wouldn't you still need to be at 3000rpms to launch even with a trans brake? I don't know too much about auto trannies, but i agree that no matter how much HP it has, it will launch hard when you let go of the brake.
I was just thinking, its pretty funny that no too many of us like ricers or any imports for that matter, but there are only a select few of us that have american made trikes. lol
heh yea it was 3000 or 3500 cant quite remember but it was in that range, the car is like a rocket out of the hole, before we put the new tranie and rear end it just had the stock rear end with a set of richmond gears and a TH350 with a shift kit so we couldnt launch at its full potential becuse we would blow the rear end out, but even with that we did low 13;s in the quatermile, not sure with the new set up tho becuse of the shaved door handels the basterds wont let us race it, so we might be puttin the old door latches back on...:)
cliff2302
03-29-2005, 05:22 PM
Thats a pretty respectable time. Must be a blast to cruise in.
Oldshell4481
03-29-2005, 05:46 PM
lol i hate honda cars yet own a honda trike
Thats a pretty respectable time. Must be a blast to cruise in.indeed it is...i wish this dam snow would melt and dry up so we can take it out!
350xsx
03-30-2005, 02:53 PM
looks pretty badass, im currently in the process of buyin a 52 Ford pickup and puttin a blown 428 CJ motorr in it, or one of my friends Mustang motors, hes a world reknowned (i know that words supposed to go there but i dont know how to spell it) mustang/ford motor builder.......
I helped put my uncles 57 Chevy together, it has 980 horses without a bottle, he bought the whols NOS setup and put it in, but never fillled the bottle, nor does he plan to soon, tooooo much money to go and wreck that motor, o, and its street legal, if ya wanna see pics i could post some......it gets me all tingly everytime i see it lol, its burnt more ricers then any otrher car ive seen......not just beat them but totally dominated,like Supra's that say they have 1300hp(BS), just get left
1984kxtTECATE
03-30-2005, 03:03 PM
Supra's would never dream of having as much torque as it though. I gotta get pics of my uncles 69' vette, 500 rwhp, it has the rare 400hp engine and if it were completely stock it is valued at $52,000 as far as one of the auto price guides go. I want to see pics of the 57, somthin like that will give me goose bumps.
350xsx
03-30-2005, 06:18 PM
this is right before it was finished, now it has a wheelie bar cuz......well, ya know......
its pissin me off i cant find the motor picture on the computer, ill scan it again hold on....
http://www.imagestation.com/picture/sraid158/p9835d7e1dd969bfc477eeb02dc4e8b4c/f51d6360.jpg
350xsx
03-30-2005, 06:37 PM
Interior (http://www.imagestation.com/picture/sraid163/p5941c0ab67c0cbe8701c316bd40a25c5/f4a46ccb.jpg)
Blower (http://www.imagestation.com/picture/sraid163/p6b8860ff4f0175c4e754003c756f631f/f4a46cd2.jpg)
IN Primer, Side (http://www.imagestation.com/picture/sraid163/pfeacd9e2805a4f3a41fce22ba22cb8fd/f4a46ccd.jpg)
sorry i just kinda like stoe your thread in a way, so comment on his pics, jus look at these dont comment too much, the part that most people hate him for, is he had the car since he was 16, and he had it perfect original, he had this high dollar Porsche Red color paint, and it was like that 6 months and he tore it apart and made this, he painted it himself this time,and he had no experience paintin cars and it turned out flawless, and if you ever tried paintin a car/truck you know black is a pain in the ass to get flawless even if youve done it multiple times.....its the original motor, a 400, its punched out to a 409....and my grandma did the interior, she recovers furniture, so my uncle put her to work, :D
vartiak15
03-30-2005, 06:43 PM
thats a nice car man
cliff2302
03-30-2005, 08:09 PM
im not seeing anything
1984kxtTECATE
03-30-2005, 11:12 PM
I see a red X
350xsx
03-31-2005, 01:56 AM
dang ill retry....couldnt get it, do the links work?
cliff2302
03-31-2005, 11:03 AM
no luck with them on my computer
wow that is one nice belair, i dont belive in usin a bottel on anything...heh, i will have to get a pic of my dad's bosses 69 z28 hartop, 900 hp without the bottel 1200 with, street legal, he can stand the front end up on it....in the parking lot haha, its wicked competition orange ....nice car..lol
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.