PDA

View Full Version : is this right? (200x oil cooler)



vartiak15
04-11-2005, 09:36 PM
my bro saw it ending soon and bid on it for me and got it. is it routed right? can * rout it this way? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=43977&item=4540988604&rd=1 if not i will put the ports in my 200x and do it like the instructions on here. its worth the oil cooler if it isnt set up right.

thefox
04-11-2005, 09:40 PM
It looks like it is set up right to me as long as there is a block off bolt in between the 2 connectors.

chris200x
04-12-2005, 07:25 PM
I have never seen one of those before. Does anyone have any good information about this thing? How do you mount it up?

dirtface
04-12-2005, 07:51 PM
I have a 200m I drug in for parts, that has one very similar to that hooked up on it. Other than that, don't know much about them. I think more oil would be a good thing.

LonesomeTriZ
04-12-2005, 07:59 PM
Those oil coller are not all that complicated. It is very easy for you to make one your self. Simply fet a transmission filter in a size that will work you the area you have to work with, and you can ameki it look clean and it will work well. I am not sure if you can see it in this photograph, but I have one mounted on the front of my Warrior.

350x'inNY
04-12-2005, 08:10 PM
There were a number of aftermarket kits... "back in the day" ... take a peek at some early/mid 80's Dirtwheels and 3Wheeling mags. They did a few Project Trikes with them too. Seems like there was a thread about 6 months back that Howdy had posted a few posts on installing one.

Bruce

thefox
04-12-2005, 08:14 PM
here is the thread with the cooler details in it ... http://www.3wheelerworldforums.com/showthread.php?t=28433

LonesomeTriZ
04-12-2005, 08:16 PM
There is also a How To one the home page.