Mint 350X on ebay!!

[Darius1502]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4545659813&category=6724#ebayphotohosting

Sweet::::http://i8.ebayimg.com/01/i/03/ee/f6/7c_3.JPG

[trikerider2oo7]

nice...i want that pipe!

[BIGCRIP28]

nice...i want that pipe!

dennis kirk has some

[350x'inNY]

Hmmmmm.... what thing is setup wierd on it?? :naughty:

[200xman]

Hmmmmm.... what thing is setup wierd on it?? :naughty:

The bars look bent and the forks are slid way up in the tripples.

[Maine_Triker]

Is there an 'extra cable' coming up from the engine?

http://i4.ebayimg.com/03/i/03/ee/cc/19_12_sb.JPG

[350x'inNY]

Is there an 'extra cable' coming up from the engine?

http://i4.ebayimg.com/03/i/03/ee/cc/19_12_sb.JPG

That'd be the clutch cable routing on a 86 350X.... 200Xman got what I was hinting at! Guess us NY guys have a closer eye to detail! :naughty:

Also.... the rear rims look to be '85 rims. Not a real clear shot of them, but I don't see light coming through the "cast vents" the 86's had. The front Hondaline headlight lens gaurd is red, and not the chrome that would match the chrome Hondaline headlight gaurd he has on it! :beer

Bruce

[SpeedBump]

Close on the rear wheels.....not 85. Gotta be newer...250/300/400EX. Hondas didn't have a fully rolled lip until 86...and then it wasn't anodized clear, but gold and they came on the TRX250Rs...the stock 85s had the same lip as the billet centered 86s. As for the tires...they are similar to the 300EXs, but I think they are probably the stock units. I seem to remeber the 300EXs had a larger single square knobbie right in the middle. Nice bike for sure....My favorite one too. I am 99% sure. If anyone else has any more to input....feel free. ;)

[Maine_Triker]

That'd be the clutch cable routing on a 86 350X....


Oh crap, I was hoping it was a custom choke cable :naughty: :naughty: . Then i would e-mail him and ask how to set it up :naughty: :naughty:

[350x'inNY]

Oh crap, I was hoping it was a custom choke cable :naughty: :naughty: . Then i would e-mail him and ask how to set it up :naughty: :naughty:

I have an article form an old 3wheeling magazine I think in 84, that showed how to mount a custom choke on a 200X using other ATC parts. I've thought about it before on my 350X, but decided to just stick to Hondaline/Aftermarket assessories only...

Good catch Speedbump.....I was focusing in on the hub/center of the wheels.... knew they weren't 86's... the center's look 85, but didn't notice the lip.

Bruce

[dividebyzero]

I see one thing that you 350x whores missed.Shame on you bruce!!Look at the shock rezzy.What color is that knob?

[BIGCRIP28]

mines that color.