PDA

View Full Version : can YOU tell what`s wrong?



OldManDM
05-30-2005, 02:32 PM
tell me what`s wrong here,if you can.....

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=43974&item=4553348086&rd=1

:rolleyes:

Maine_Triker
05-30-2005, 02:35 PM
OOPS!! Wrong forum.

Besides the year thing, I don't see anything wrong... or were you talking about the year thing?

Phil

chris200x
05-30-2005, 02:36 PM
OOOH I know, I know, is it 87' never seen one of those.

Lots_Of_Nothing
05-30-2005, 02:39 PM
Besides wrong forum, and there is no proof of the 87 atcR.... Are you talking about the 85' carrier?

Or the fact its been shortened? (very common mod for flattracking)

OldManDM
05-30-2005, 02:51 PM
exactly,it`s a `86 swingarm...has the stud on the right rear for the brake caliper bracket,but it has an `85 bearing carrier,wihich i happen to know from VERY recent experience won`t work.....`85 carrier is smaller in outside diameter!

OldManDM
05-30-2005, 02:53 PM
and not necessarily the wrong forum....it IS in truth a "technical" question

OldSchoolin86
05-30-2005, 04:15 PM
I moved the ebay discussion to the ebay discussion room.

trikerider2oo7
05-30-2005, 08:16 PM
if you stick it on the lathe, you can turn it down to fit

x.system
05-30-2005, 08:47 PM
exactly,it`s a `86 swingarm...has the stud on the right rear for the brake caliper bracket,but it has an `85 bearing carrier,wihich i happen to know from VERY recent experience won`t work.....`85 carrier is smaller in outside diameter!

Thats probably an 85 tube and carrier welded on an 86 swingarm.