Im gettin my Bro's 372X

[ATC crazy]

Yup...some of you may remember me talking about the TRX372X that my brother has. Its a stroked and race-ready '85 350X motor stuffed into a TRX-R frame.

Many of you also know that my nephew blew it up almost 3 years ago. Well, my brother has a stock 350X motor that will be put into it the frame until he gets the 372 put back together. He's got all the parts, just no time to do it.

But the big news is...Im going up there mid-June and Im going to bring it back and fix her up :Bounce :w00t: I'll put the 350 motor in it, rebuild the calipers, change all fluids, grease/change bearings, and lube all moving parts. He's not giving it to me, but he's letting me keep it down here to ride and build for as long as I want! :D

I cant wait for the 372 to be put back together!! 40HP baby! :w00t:

I'll get pictures when I get it.

[OldSchoolin86]

I cant wait for the 372 to be put back together!! 40HP baby! :w00t:
Congratulations man and good luck. Maybe when you get her together you can get us a dyno sheet on this unbelievable 40hp out of a 372.

[ATC crazy]

The closest dyno is 3 hours away in Greensboro :(

[OldSchoolin86]

Well keep us updated, I've got one in the shed that I have to make a custom exhaust for in the next couple of weeks, I might just make a few extra ones. ;)

[ATC crazy]

Awesome...His has a full WhiteBrothers system on his. I have no idea whether it just bolted right on of if he had it custom bent. :?

[OldSchoolin86]

Awesome...His has a full WhiteBrothers system on his. I have no idea whether it just bolted right on of if he had it custom bent. :?
It shouldn't have bolted on, most likely it was custom bent. Gotta get some pics up of this bad boy.

[BIGCRIP28]

It shouldn't have bolted on, most likely it was custom bent. Gotta get some pics up of this bad boy.

Osin86, are you doing the 350x/250x swap? :Bounce

[OldSchoolin86]

Osin86, are you doing the 350x/250x swap? :Bounce
No but a freind has and didn't want to pay the big bucks for a powroll exhaust kit($340 for the header alone). As far as I know they are the only ones who make the kits.

[ATC crazy]

Sorry I havent been around. As soon As I get it, I will get some pictures of it, and some pics of the build up I have in mind.

One of my Brother's good friends has a 390X/250X conversion. The 250X chassis is completely stock with a bored and stroked 350X motor in it. You can not keep the front end down in any gear past 1/3-1/2 throttle.

[Mike_Ham_250R]

Yup...some of you may remember me talking about the TRX372X that my brother has. Its a stroked and race-ready '85 350X motor stuffed into a TRX-R frame.

Many of you also know that my nephew blew it up almost 3 years ago. Well, my brother has a stock 350X motor that will be put into it the frame until he gets the 372 put back together. He's got all the parts, just no time to do it.

But the big news is...Im going up there mid-June and Im going to bring it back and fix her up :Bounce :w00t: I'll put the 350 motor in it, rebuild the calipers, change all fluids, grease/change bearings, and lube all moving parts. He's not giving it to me, but he's letting me keep it down here to ride and build for as long as I want! :D

I cant wait for the 372 to be put back together!! 40HP baby! :w00t:

I'll get pictures when I get it.
Im pretty sure my Stock R makes 37hp lol... and also... when you get it, it has too many wheels, take one off LOL

[slothminx]

honda200s1984 you have to remember that your 250r is a 2Stroke motor and this 40hp is out of a 4 stroke

[AirManCam]

Yeah dude, I think 40 hp might be pushing it a little bit.

[BIGCRIP28]

yeah, 452x said his (452x) has like low to mid 40s HP.
so i think 40 from a 372 is too high.

[OldSchoolin86]

yeah, 452x said his (452x) has like low to mid 40s HP.
so i think 40 from a 372 is too high.
Low to mid 40s from a 452 is a lot too.

[BIGCRIP28]

Low to mid 40s from a 452 is a lot too.

hey, im just going by his word (PM). i have never seen a dyno run of any of the big bore kits.

[BIGCRIP28]

i agree, if the 350x motor is stock.

[Mike_Ham_250R]

Yeah dude, I think 40 hp might be pushing it a little bit.
slothminx, thats what i was getting at...

[ATC crazy]

Thats just what I've been told by the engine builder. If and/or when I get the money and means of taking it down to Greensboro (2.5 hrs away) to have it Dyno'ed....I will let ya'll know. But it does feel like she's got the power in the upper-30HP range

Also, this thing is a 5-speed, and 350X's are 6 speed....so I dont know where that 6th gear went to :wondering

[ATC crazy]

Oh yea...one more thing

Once the 372 motor is put back together, and I get the stock 350 motor out...I might see If I cant find a 350X rolling chassis to put the stock motor in!

[Mike_Ham_250R]

Oh yea...one more thing

Once the 372 motor is put back together, and I get the stock 350 motor out...I might see If I cant find a 350X rolling chassis to put the stock motor in!
Now your thinking!

[Blown 331]

My post got deleted? GAY.

[OldSchoolin86]

My post got deleted? GAY.
:wondering I don't see any record of it being deleted Blown, if it was it was probably an accident.

[toyota200x]

So when are you getting it? I want to see some pics. :beer

[ATC crazy]

Im bringing it back this weekend. Be patient...pics will come