A suggestion for those who port their own cylinder's.

[Jason Hall]

I put a paint gun air regulator on my die grinder so I can turn the air pressure down real low, now I don't have to worry about regulating the air with my hand. Just hold the trigger wide open & set air to wanted speed. Gives alot better contol to get in tuff spots. :beer

[bigredhead]

Got any pictures of your work ?

might inspire me !!! .. lol.. (I have a spare head i might give it a go.. )

[86250RZ]

There should be no need for an air regulator if you own a decent die grinder, any that I have owned have a adjuster built in. :Bounce

[Jason Hall]

The die grinders I have are Blue Point, the spray gun reg works alot better than the mickey mouse reg they have on them. You can adjust them a tiny bit at a time Quickly. :Bounce :Bounce :Bounce

[Hornetpowerspor]

I have one of those also, but I rarely use it. I love my Fordum. I have the 90 degree tool with a foot pedal that controlls the speed of the bit. It works much better when you to get in to the transfer ports on the 2 strokes. My blue point also has a 90 deg piece, but you have to be extremely careful using that on precision work. That is a good idea with the regulator, nice tip!