View Full Version : Vmax Owners!
Six Stroke
12-23-2005, 01:53 PM
Does anyone have a manual or any kind of service info that would cover a '95 Vmax 600? I need to know what the factory settings are for the air screws.
Thanks.
Start at one turn out and work your way out with plug chops and feel!..simple stuff.
700srx
02-11-2006, 04:58 PM
Straight from the factory owner's manual:
air screw 1 1/8 turns out from the seated position.
also, idle speed is listed as 1550 +/- 100 rpm.
Chrisbroeders
02-13-2006, 03:19 PM
i have a problem wih my 96 vmax ... when i first fire up that beast i have to keep my hand on the throttle and i cant let it idle or else it fowls out plugs like mad.. .i cleaned and set the carbs according to the book... what else could be wrong
dufrain
02-20-2006, 10:24 PM
dirty air filter, sticking choke or too rich pilot jets if it has them
Six Stroke
02-22-2006, 06:55 PM
Straight from the factory owner's manual:
air screw 1 1/8 turns out from the seated position.
also, idle speed is listed as 1550 +/- 100 rpm.
Thanks. A late thank you, but thanks. I also found it on the clutch guard that was laying in my parts pile.
700srx
02-22-2006, 07:08 PM
LOL, the thanks isn't late. If I would have seen this new sled forum earlier, I would have posted closer to when you needed the info!. :(
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.