Tecate Wheel spacers

[lonestar]

You may just go broke -goingforbroke- if you want the spacers!

[BLAZERONE22]

Are those spacers hard to find? I lucked out coming back form the doctor, a shop that I used to go to was having a retirement sale, 50 percent off of everything. , I must of spent $500.00 in there, but I picked up a set for the tecate for 40 bucks new in the box. :beer

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=4599940374&sspagename=STRK%3AMEWA%3AIT

[90nut]

Well, if you have the 85 tecate with the 4/156 bolt pattern you can use the banshee spacers(they were on a certain year but don't recall at the moment.) Now if you have the 84 tecate with the 4/4 bolt pattern you can use wheel spacers for a blaster.

[BigGreenMachine]

Theres usually a set or two on ebay monthly but they go for cheap in most cases so its worth jumping on. I bought a set not long ago for my small 84 hubs, old aluminum X shaped Durablues.

[lonestar]

The ones I have found online are only 1" or 1.5". these were 2.5" In my opinion they were a real good find.

[going4broketecate85]

Sorry Lonestar I didn't realize that you were a member here! Don't remember seeing your name here much. You should of e-mailed me and I would of stopped a long time ago! I didn't see this thread until after the auction ended! But then again you did start this thread out by talking smack(don't know why) Hope you like them I know I sure would of!:Bounce
P.S. Go Longhorns beat the living sh!t out of USC!!!!!!!:beer

[lonestar]

just razzing you a little, there is another set of 2.5" spacers on ebay right now....................good luck

[3Razors]

4/4 pattern is the same as virtually all polaris atv's. 1984 tecate is 4/4. The blaster is not a 4/4 pattern. Durablue makes lots of models for the 4/4.

[lonestar]

Yes, but a 85 is 4/156