PDA

View Full Version : Tecate wide axel - first generation



Tecate4life
04-11-2006, 10:51 PM
Can't tell if it's dura blue or not, the poor seller can't spell nor seems like he can identify the correct year, nevertheless a good find for a T3 owner...see link

http://cgi.ebay.com/ebaymotors/86-KAWASKI-KXT-250-TECATI-ATC-40-XTRA-WIDE-R-AXLE-W_W0QQcmdZViewItemQQcategoryZ43974QQitemZ462877449 3QQrdZ1

BigGreenMachine
04-11-2006, 11:03 PM
Damn, no funds but I need that. 86 or 84 it really does not matter. You can use the 86 carrier in the early Tecate if you run the 86 rear brake setup.

Although it does look to be the 84/85 because of the thick 14? hub splines.

sportvette
04-14-2006, 01:02 PM
i picked this up in hopes of fitting it to a 86 tecate. i also bought the hubs he had on there.

BigGreenMachine
04-14-2006, 10:48 PM
Let me know if it was the 86/87 axle.

James

OZQUAD44
04-21-2006, 09:00 AM
Can you bolt an 84/85 Tecate axle onto a 86/87 Tecate

Will an 84/85 Tecate axle fit into an 86/87 carrier?

If I purchased an 84/85 axle with carrier, will it bolt onto the 86/87 Tecate swing arm

BigGreenMachine
04-21-2006, 11:56 AM
It will bolt on but the brake calipers are different so you will need an 85 caliper. Get the hubs as well? You'll need them.

90nut
04-23-2006, 01:15 AM
the 84and 85 axle is also a couple inches narrower. Just so you know.