PDA

View Full Version : Raptor question



stonehedge
04-01-2003, 05:04 PM
Has anyone had any exp. with a throttle/idle/rpm issue? Its stick'in, I've lubed and cleaned everything, and its not a twist. Maybe a carb problem? I did clean them out, and the intakes as well, the (butterfly valves?) Looking for some guidance. Only when warm and not way high idle, just slight, and not the idle adjust screw. Unless that gizmo has more to do with the idle than I know?

plkmonster2
04-07-2003, 02:11 AM
check the slider in the carb.. mine was dented and got stuck on a higher idle, and would go down if you flicked the throttle. also, you could be lean.