PDA

View Full Version : my new project banshee engine +tri-z frame = fast! PICS



03 ORANGE SHEE
08-07-2006, 07:59 PM
put that 490 back on the porch raffa:lol: ,you can get 100+hp out of these motors, looks like billy might have a problem at the drags next year:naughty:
got all year to work on it!! have'nt desided on them cheetah cylinders or not, they put out like 125hp (dirtwheels mag)but cost like $2000

Billy Golightly
08-07-2006, 08:35 PM
You got a LOT of frame moddin to do there :p

Mrs.Mosh
08-07-2006, 08:38 PM
You got a LOT of frame moddin to do there :p

you got that right. Moshman has already mocked his up

hrc85250r
08-07-2006, 08:40 PM
not that much modding, just custom motor mounts. DON'T weld the motor in the frame! make sure you can get it out! the realtrick is the pipes. you will probly want to run custom pipes..... it will haul ass either way!

Billy Golightly
08-07-2006, 08:43 PM
Man I wish I had more help down here and time...I could have a frame jig whipped up in a few days with some help if we worked on it.

3Razors
08-07-2006, 08:49 PM
That is a cool project. I would do the banshee motor anyday over the air hammer 490. Is this going to be for drag only or all around?

Derrick Adams
08-07-2006, 08:55 PM
not that much modding, just custom motor mounts. DON'T weld the motor in the frame! make sure you can get it out! the realtrick is the pipes. you will probly want to run custom pipes..... it will haul ass either way!


Doubt that. Chain alignment, exhaust ports coming out right where the main tubes are, kick start clearance... All those issues and more make it much more than a bolt-in deal with custom mounts.

Bryan Raffa
08-07-2006, 09:14 PM
get to work on that raggggg.. i know where the parts are!!!:naughty:

Mosh
08-07-2006, 09:26 PM
it will not be as hard as you guys are thinking. a good welder and some good measurements will get it done.i have already researched this and abolished the idea for now. i figured, a banshee motor will just be overkill for the z chassis. i have not found a way to get all the horsepower to the ground. you will either spin the tires for days,or sky the front end.maybe someone will get the trick setup.in any sense,the fuel pump set-up will not work on a big bore cheetah shee engine.a top mount fuel tank is needed for sure.but good luck with that and,i hope it goes well.

Darius1502
08-07-2006, 10:22 PM
If its a dragger, Orangeshee can simply put a Y Zinger tank on the Z or get one of those aluminum jobs.

Excellent idea Orangeshee....you are the man!

But hey...wait a minute!! What about an LT 500R Quadzilla engine in that bike?

I'll throw one more for you....KTM 550 M/XC engine...or the KTM 500 engine...65 HP stock!

85ytz250n
08-07-2006, 11:07 PM
I think there are alot of people on here that should try to get a job with one of the big three, I would love to see what ya'll could do with their money and your imagination. Good luck with the project, Cant wait to see the progress pics and watch the build unfold.

Barry

hrc85250r
08-07-2006, 11:12 PM
Doubt that. Chain alignment, exhaust ports coming out right where the main tubes are, kick start clearance... All those issues and more make it much more than a bolt-in deal with custom mounts.


chain alignment is the same for all bike motors with the chain on the left, exhaust ports will be off slightly, and custom pipes would help quite a bit, and kickstart isnt really a problem because they are cast steel and can be heated up and tweaked or you may need to make a custom one. plus you wouldnt mod the rame for the kickstart. the kicker would be modded. ive done about 7 engine swaps and they usually seem like more than they end up being, especially the 2 strokes....

r00sty
08-08-2006, 06:56 AM
Be right down Billy..... :beer

Wishin I had more Vacation, I'd be there brother!!

Nate, you have too much time on your hands, get a hobby, like masturbating!! lmfao!!

Troll 2
08-08-2006, 08:36 AM
Looks like a fun project. Heres a link to one; Good luck http://roostking.homestead.com/TriShee.html
http://radbanshees.homestead.com/files/tri-rz2.jpg

Yamahondaman
08-08-2006, 10:15 AM
i remember seeing that BAN-TRI Thing Year's ago !!! i don't think i would wanna do no 100 mph on that thing !!!

ATCWRENCH
08-08-2006, 11:29 AM
or you could build it to look like this. you'd have no problems getting the motor to fit right.

Bryan Raffa
08-08-2006, 12:28 PM
i remember seeing that BAN-TRI Thing Year's ago !!! i don't think i would wanna do no 100 mph on that thing !!!

Oh come on ronnie... dont be a chicken!:lol:

CHAINSAW
08-08-2006, 06:33 PM
I had a shee motor in a Z frame a while back.. and scratched my head for a long long time. It would be easier, and less headaches, to mod a shee frame and add triples to it. and not that goofy looking way from that trishee in dirt wheels, by doing it the right way.
I was real close to doing this mod,.. but decided to drop the CR500 motor in the Z frame instead.

OldSchoolin86
08-08-2006, 06:47 PM
I wonder how long it will take till we see a turbo hayabusa trike pulling 250+ hp? lmao

Yamahondaman
08-08-2006, 06:57 PM
my cousin did the Suzi 1000 TRI-Z Thing ... and i did the H2 Tripple TRI-Z Thing...what i did was weld the "top" of the TRI-Z Frame on Top of the 1975 H2 Frame so the 3-wheeler fender's would all work and the Tri-z front end bolted right up !!! and the 6" swinger bolted up to the H2 Frame.........
TRI-Z "junk" Fit's EVERYTHING !! :naughty:

Bryan Raffa
08-08-2006, 07:03 PM
my cousin did the Suzi 1000 TRI-Z Thing ... and i did the H2 Tripple TRI-Z Thing...what i did was weld the "top" of the TRI-Z Frame on Top of the 1975 H2 Frame so the 3-wheeler fender's would all work and the Tri-z front end bolted right up !!! and the 6" swinger bolted up to the H2 Frame.........
TRI-Z "junk" Fit's EVERYTHING !! :naughty:

dam ronnie got a bigger picture of that RAGGGGGGG!!!!!

Yamahondaman
08-08-2006, 07:33 PM
aight......................http://www.3wheelerworldforums.com/showthread.php?t=35163
it's on Page #4..........

jason 32
08-10-2006, 04:44 AM
?? humm
where the hell is the swingger going to bolt up at?????

Bryan Raffa
08-10-2006, 07:45 AM
looks like you need to S T R E C H !!! the front of that frame... then you could run a S T R E C H E D !!!!! banshee swinger.. dont for get the dog bone mounts on the bottom.. if you do re work the front rember the pipes. 2 into one or two singels???

Bryan Raffa
08-11-2006, 10:31 AM
is this the machine you were talkin about?

03 ORANGE SHEE
08-11-2006, 04:45 PM
yep, see it run?? 0-300ft in 3.2 sec!!

MIK6
08-11-2006, 05:33 PM
I posted pictures of that quad a few years back.
http://www.3wheelerworldforums.com/showthread.php?t=27100&

That thing is fast!!!

MIK6 / Mike

Bryan Raffa
08-11-2006, 06:37 PM
ha ha ya i have seen it run... scarey fast!!

Bryan Raffa
08-25-2006, 10:28 PM
bump.. get it ragggg! stop letting rust more than it allready is.... christmas time... think of all the presents under the tree for it!!!! lol