PDA

View Full Version : discontinued belt, help



sblt500r
11-27-2006, 10:46 PM
the belt i am looking for is a gates 6040, thats discontinued. i don't know the size of it, and was hoping someone on here may have a vintage belt guide that lists this belt and the size. its for an 1969 or 70 attex 208tt 6 wheeler. i used a belt from a artic cat puma 340 that i cut the sides down to fit. if you can't get me the size of that gates 6040, how about the size of the artic cat puma belt? also a part number of a belt with close dimensions would be great.

4cylinders
11-27-2006, 11:23 PM
hey, have you tried central snowmobile? 1-800-558-6778

84honda200s
11-28-2006, 08:31 PM
well i dont know the year of the artic cat. but here is are the specs on a 71 artic cat 340 belt. 1-3/16 wide and 43- 1/16 arond the outside of the belt.

sblt500r
11-28-2006, 10:52 PM
i don't know what year the puma was either! it was from the 70's though. its was a twin 340. i got a measurement of 44 1/4. could have streached? does anyone happen to now the dayco or a cross referance number for that arctic cat belt?

brapp
12-06-2006, 01:45 PM
i have an attex 300st i can go measur eth ebelt up for that. if it helps at all?

sblt500r
12-06-2006, 02:33 PM
i have an attex 300st i can go measur eth ebelt up for that. if it helps at all?

yea, it would help, as the st300, 208tt, and 297 all use the same belt. if your belt still has a part number on it, that would help also.
thanks

xljimmy
09-09-2009, 10:15 PM
I know its old thread but Did you find anything out on the belt? I know its 43"+\- fraction and 1" wide

I found 1" x 43.3" = gates 1626V428