PDA

View Full Version : 350x swingarm bushings


x.system
02-07-2007, 02:37 PM
I got that swingarm in, thanks Mike. I need a measurement from end cap to end cap and I can make up some bushings for the 350x. These will be ready in a day or so after I get a measurement.
team-red-rider
02-07-2007, 04:01 PM
how about 82 250r bushings?
kb200x
02-07-2007, 04:08 PM
I got that swingarm in, thanks Mike. I need a measurement from end cap to end cap and I can make up some bushings for the 350x. These will be ready in a day or so after I get a measurement.


:w00t: Now you are talking X.System! 350X!

If someone doesn't get those measurements soon I'll pull my swinger off and get them. How much are these set's going to be?

How about one for the rear shock top mount? (#22 and 24 on bikebandit schematic under rear cushion)


:w00t:
x.system
02-07-2007, 07:26 PM
how about 82 250r bushings?

I think I made some for the 81/82r but I can't find my pics. I will check tonight and get back to you. I know I have a 81/82 swingarm here.
x.system
02-07-2007, 07:28 PM
:w00t: Now you are talking X.System! 350X!

If someone doesn't get those measurements soon I'll pull my swinger off and get them. How much are these set's going to be?

How about one for the rear shock top mount? (#22 and 24 on bikebandit schematic under rear cushion)


:w00t:

These will be $15 shipped. I'm only making parts I have here that I can test fit before they go out.
team-red-rider
02-07-2007, 07:30 PM
how much for the 81/82 bushings?
x.system
02-07-2007, 09:05 PM
how much for the 81/82 bushings?

$25 shipped for a 4 piece kit. I don't have any made up but I'm making a bunch tomorrow.

I made up 6 sets for the 350x tonight, just need that measurment to finish them up. 3 sets in white and 3 in black.
team-red-rider
02-07-2007, 09:12 PM
what comes with the set?
x.system
02-08-2007, 09:09 AM
what comes with the set?

Look at the tecate bushing thread, they will be very similar to those.
mean350
02-12-2007, 09:45 AM
the swinger bushings are the same as a 300ex and a 400ex. i just put a whole kit from a 300 in my 350x swinger. all i had to do was cut the tube that slides inside it down a little bit
x.system
02-12-2007, 10:11 AM
That doesn't surprize me, honda used the same size bearings in alot of their swingarms, along with the collar, seal and dust cover.
mean350
02-12-2007, 12:24 PM
yeah everything but the spacer or waht ever was the same.