PDA

View Full Version : 200x missing in the upper rpm's.



3WheelsOn2
06-26-2007, 08:53 PM
I have a 1984 honda 200x, It starts first or secont kick every time. in the lower rpm's it's great, but lately when I get into higher rpm's it starts missing real bad and looses power.

Any ideas?

It has a new NGK in it, Air filter is clean and I cleaned out the carb right after I noticed it, no affect what so ever.

3WheelsOn2
06-26-2007, 09:07 PM
It does burn oil, Not like a whole lot... but some. If that helps any.

icp4life162005
06-26-2007, 10:28 PM
Have you put on an after-market exhaust or changed the air box in anyway? It sounds like your running lean on the top end.

3WheelsOn2
06-27-2007, 10:26 AM
No aftermarket box, But I to run it with the lid off. I had a home made pipe on for a little while (wasn't a full system, just a slip on pipe were the can goes on.), was way to loud. I changed it back to the original can the next day and it didn't help much.

icp4life162005
06-27-2007, 04:21 PM
put the airbox lid back on and see if its any better, if it is then your problem is jetting. You can also just do some plug chops.

3WheelsOn2
06-27-2007, 05:05 PM
Ok, i'll try it and see what happens.

3WheelsOn2
06-27-2007, 06:05 PM
I put the lid back on, that fixed it. I would like to run it with the lid off, Because it gives it better air flow, Will I need a bigger jet for it to run smooth? if so any suggestions on the size? it has a 108 main jet in it now.

J.D.
06-27-2007, 06:28 PM
Just go up 1 size at a time and check your plug frequently to make sure you're doing it right.

3WheelsOn2
06-28-2007, 10:29 AM
Thx for the help guys, one last question. Were is the best place to get jets... I'd like to get several different sizes not just one at a time.

ATCR250R
06-28-2007, 12:12 PM
I am pretty sure dennis kirk sells them in five packs for that carb.