PDA

View Full Version : mikuni 32 mm carb on a tri-moto?



trimoto.125
07-25-2007, 09:43 PM
Hi everyone, I was wondering if it would be ok to run a 32mm mikuni carb on a yamaha tri-moto 125. I think the stock carb size is 20mm but i am not sure. I don't have the stock carb, but i had a 32mm carb lying around so I thought I wondering should make use of it. The motor on the tri-moto 125 has also had some top end modifications but i am not sure what they are. The point I am trying to get to is will the jetting of the carb work with the top end modifications?

icp4life162005
07-26-2007, 01:58 AM
no, it will be WAY to rich and probably not even work fitment wise anyway.

trimoto.125
07-26-2007, 01:08 PM
would i still run rich if i put the carb setting to really lean?

Thanks for your help. I will have to find a smaller carb.

firefirefire90
07-26-2007, 01:46 PM
You could run the 32 if you wanted to but you would need to jet down, get an aftermarket pipe, and modify the motor for the extra gas/air flow coming in. What goes in, must come out right.