hillshooter project--85 atc 250r

[nlvredneck]

hey there, i'm new to the 2-stroke/3-wheel world so i'm looking for a little help :D right now it's got a cool-head w/19 cc dome, v-force3 reed cage, esr airbox eliminator and a +4 swinger. i'm wondering what 'yall would recommend for gearing and paddles? thanks

[El'Capitan]

I would go w/ 22'' Skat Trak hauller 8 paddles. As far as gearing goes you could drop a tooth in the front and that would probably do the trick :beer

will you be doing any tree shots also? drags?

[nlvredneck]

well...it came with some 20x10x8 8 paddle haulers which are very old/hard and 12/39 gearing and it doesn't seem to pull comp hill (dumont dunes ca.) very hard, so i tried the 21x12x8 7 paddle haulers off of my ltr450 and they were way too much tire? (20's=62 roll-out & 21's=68 roll-out) so i don't know?? i'm thinking of going to the stock 13/39 gearing with the 20's and trying that?? what do 'yall think

[SYKO]

I run a 20x11x10 gbc paddle masters on my 300 air fooler, and they work wicked! but thats in the fl sand not the wicked sick dunes out west you luck motha fucus got! oh btw welcome!!

[El'Capitan]

is your machine stock? or what mod's does it have?

i havent really heard anything but negative about the paddle masters, they look super hard and are said to weight more than most dirt tires :wondering

and lol @ you east coasters, dunes are the best :P

[SYKO]

and lol @ you east coasters, dunes are the best :P


man shudup!:cry: :naughty:

[nlvredneck]

is your machine stock? or what mod's does it have?

i havent really heard anything but negative about the paddle masters, they look super hard and are said to weight more than most dirt tires :wondering

and lol @ you east coasters, dunes are the best :Pwell like i said, it's got a cool-head w/19cc dome, v-force3 reed cage, fmf fatty pipe, and an esr airbox eliminator kit. it's got some old/hard 20x10x8 8 paddle haulers and 12/39 gearing. i'm thinking of trying the stock 13/39 gearing?

[Fox250R]

well like i said, it's got a cool-head w/19cc dome, v-force3 reed cage, fmf fatty pipe, and an esr airbox eliminator kit. it's got some old/hard 20x10x8 8 paddle haulers and 12/39 gearing. i'm thinking of trying the stock 13/39 gearing?

nice trike! I run 20x10x10 8 on mine but im looking for 10 paddle when i get my swinger... Your swinger isnt stock is it? looks to be 2 over or so...

[Dammit!]

When you say it doesn't pull comp hill very well, what exactly is it doing and what are you trying to make it do? Are you trying to get another gear up the hill out of it or what?

[firefirefire90]

I dont think you should be running an FMF if you wan't a hillshooter.

[Yamahondaman]

I dont think you should be running an FMF if you wan't a hillshooter.

THANK YOU firefirefire !!! nor THAT Reed Cage ! PT High Rev Pipe,CR Reed Cage,NO SPACER,Boyesen reeds,14-39 Gear,Shaved Head ".025".....
F M F ... i like the Stickers but NOT the Product !! :beer

[vegas250rr]

I like my 12/39 setup... it got me another gear on most hills I try.... My problem is that I need some port work. BTW, welcome to the board, its always good to see fresh faces in VEGAS!

[RedRider_AK]

F M F ... i like the Stickers but NOT the Product !! :beer

I like the merchandise and the stickers, but not the product... LOL.

[nlvredneck]

well as for pullin comp, it runs up in 4th but it seems like it's not really accelerating any more, it's not bogging down or anything it just plains out? i think it's just out of h.p's. that's why i'm looking to see if maybe a differant tire set-up would make it faster or making the gearing a little taller by going to a 13t front sprocket instead of the 12? and yes it has a +4 swinger. all this is to just get the most out of what it has until i get the funds together for a REAL POWERPLANT ! :)