PDA

View Full Version : Banshee rear hubs onto a ytm200 will they fit????



jamiegolf
12-19-2007, 03:45 PM
hi guys
i bought some banshee rear hubs last night from ebay, but it stated in the listing that they fit a ytm 200 aswell? is this true??? i hope so because i have bought them now!!

Tri-ZNate
12-19-2007, 06:21 PM
count your splines and I could tell ya. If a banshee set fits than a tri-z will too

Tri-Z Pilot
12-19-2007, 06:22 PM
Well you'll find out when you get them:D I had banshee hubs on my tri-z.

Yamada
12-19-2007, 06:31 PM
He Jamiegolf, let me know if it fit. It would be cool to be able to fit barely any wheel to the rear of my ytm-200

jamiegolf
12-19-2007, 07:17 PM
the only reason i have bought banshee hubs is because i cant find any decent ytm200 ones!!! i hope they fit cus ive gota wait 10 days for them to arrive from the states. thats 10 days of no riding!!!!

SWIGIN
12-19-2007, 09:08 PM
they should fit

jamiegolf
12-22-2007, 06:11 AM
i hope so im not going to be impressed if when they do arrive and i still cant use my trike!!! ive ordered a few bits from the dealers aswell for the back axle just a few seals bearings and locknuts. thats all arrived today so im guna go and pick them up later!

Youngrasher
12-22-2007, 06:26 AM
The hubs might fit the axle but won't the studs for the wheel be different,

jamiegolf
12-22-2007, 06:50 AM
i dont know but i will let you know when they arrive, if thats the case then i will redrill my wheels to fit the hubs. easy!!

pickleweasel_00
12-23-2007, 03:17 AM
yeah, the ytm should have three lugs and the banshee will have four

jamiegolf
12-23-2007, 06:04 AM
my ytm 200 has 4 lug wheels, i think the ytm225 have 3 wheel lugs.

Tri-ZNate
12-23-2007, 09:10 AM
my ytm 200 has 4 lug wheels, i think the ytm225 have 3 wheel lugs.

the 200 my buddy has has a 3 lug split rim on his. the 225 were 4 lug

jamiegolf
12-23-2007, 10:22 AM
looking at the parts manual i have for my ytm200 it is supose to have 4 wheel lugs. they should be with me in a few days so i will let you know

Yamada
12-24-2007, 06:20 PM
some ytm200 have 3 bolt hub, others got 4 studs
I think the chain driven ytm have 3 bolt hub.

madmanwithmouse
12-24-2007, 08:46 PM
well if banshee fits and tri-z fits then so will tecate, blaster, mojave and lakota.

jamiegolf
01-09-2008, 06:02 PM
well i had my hubs on friday guys, and guess what????? they didnt fit the wheels!!!, fit the axle fine but the bolt spacing is different!!!! no problem though as i had a set of car steel wheels that the spacing was the same as the hubs so i had a mate of mine to lathe out the centres of the steel wheels and weld them into the centre of my ytm wheels. did a nice job too, bit wider rear track as they stick out a bit further!!!

Yamada
01-09-2008, 06:25 PM
Just before you posted this answer I was to ask you how it turned.
So the banshee hub fit perfect on the ytm-200 axle?
That's a great new.

jamiegolf
01-10-2008, 04:15 AM
Just before you posted this answer I was to ask you how it turned.
So the banshee hub fit perfect on the ytm-200 axle?
That's a great new.

they fit the axle perfect!!!!