PDA

View Full Version : 400ex engine into a 350x frame



01400ex
02-23-2008, 02:20 AM
i've posted already in trikesylvania i have an extra 400ex sitting in my shop doing nothing ...i want a 350x .. i can't find a 350x close enough to be able to buy.. so i thought about putting a 400ex engine into a 350x frame.. looks like the jug and head are higher on the 40o but otherwise the engines are very similar. has anyone ever attempted this..what do you guys think. did i mention i have an abundance of aftermarket parts also for a 400ex. so this would work out pretty good if the engine would fit ..and then theres the oil tank...just thinking out loud

give me a little input..

thanks

hondahaulic
02-25-2008, 11:45 PM
I really think this would be a great trike setup. Electric start, a little more stock power, parts availability, aftermarket support (440x?? :naughty:), and if you could get ahold of a 2005+ engine, youv'e got reverse. For the oil tank, you could modify the backbone of the frame or the front downtube to hold the oil. That is, if you can't find a simple spot somewhere in the frame to just mount a tank.

01400ex
02-29-2008, 12:47 AM
i'm seriously pondering this project!!!!

300rman
02-29-2008, 02:32 AM
so you have a 350x roller layin around?

SWIGIN
02-29-2008, 02:47 AM
I really think this would be a great trike setup. Electric start, a little more stock power, parts availability, aftermarket support (440x?? :naughty:), and if you could get ahold of a 2005+ engine, youv'e got reverse. For the oil tank, you could modify the backbone of the frame or the front downtube to hold the oil. That is, if you can't find a simple spot somewhere in the frame to just mount a tank.

what is the stock hp of a 400ex?

440cc is small to what a 350x can be made into.....e start and the oil tank is just dead weight IMO

Dirtcrasher
02-29-2008, 07:33 PM
Got that right.....

The 350X motor itself is heavy enough as is! and has tons of potential.

OldSchoolin86
03-01-2008, 05:28 PM
The 400ex engine is too big to do without frame mods and you need to deal with the oil tank. Mounting is all different too. If you want e-start and reverse in a 350x the 300ex engine with an fst 390 kit is the smarter choice. Even a built 330 would run with most 350x's.

SWIGIN
03-01-2008, 05:36 PM
i just thought of something.........remeber the old 6 speed 250x motors TC used to build, well they were 350x trannys in the 250x cases.

now why couldnt you use the 250x tranny in some 350x cases?

6th is just replaced with reverse but i think it would be easyer to swap the whole tranny....or at least have them on hand


edit... on second thought this might be harder then it seems

OldSchoolin86
03-01-2008, 05:36 PM
440cc is small to what a 350x can be made into.....e start and the oil tank is just dead weight IMOI think the most you can go with a 350x before Frankensteining other bike parts on it is 452 right? The 400ex can go to 500.

SWIGIN
03-01-2008, 05:38 PM
i knew a guy who had a 570cc 350x......now it hardly finished a race but thats big

not to mention that the 400ex cly studs like to pull out once you build them up

SWIGIN
03-01-2008, 05:41 PM
I think the most you can go with a 350x before Frankensteining other bike parts on it is 452 right? The 400ex can go to 500.

depends what you call frankinsteining.....you need a big bore kit to get to 452 anyway

now... add a 6mm powroll crank to that 452 and you got a 491.9cc

OldSchoolin86
03-01-2008, 05:55 PM
not to mention that the 400ex cly studs like to pull out once you build them upThat's an easy $50 fix ;)

I'm pretty sure you can't take a 350x to an overbore of 11mm even with a new sleeve. A 452x is an 86mm big bore with the 6mm stroke. To hit more then that I'm thinking you have to start using XR parts and toss the top end all together.

Edit: I just ran the numbers that's still only a 430. LOL, I'll stop while I'm behind on the 350x knowledge.

The Goat
03-01-2008, 09:14 PM
no it isn't oldschooling...LA sleeve offers a big bore able to be bored to 452.

one may find its way onto my build if it stretches out long enough. I just have to be through with it by summer. lol.

OldSchoolin86
03-01-2008, 11:18 PM
no it isn't oldschooling...LA sleeve offers a big bore able to be bored to 452.

one may find its way onto my build if it stretches out long enough. I just have to be through with it by summer. lol.
Yeah I know, that's why I ducked out and said I'll quit while I'm behind ;)

The Goat
03-02-2008, 07:19 AM
I'll admit to being clueless.

one opportunity this would present would be to have a brand new engine in a trike. nothing beats new.

OldSchoolin86
03-02-2008, 09:47 AM
one opportunity this would present would be to have a brand new engine in a trike. nothing beats new.Maybe, but at what cost? You'd have to completely bastardize that 350x frame to make it work.

BigGreenMachine
03-02-2008, 07:36 PM
Search. There was a member that posted a pic of the 400 in a 350X frame.

OldSchoolin86
03-02-2008, 07:53 PM
If you're talking about this one I'm waving the BS flag that it ever ran. One post with a bad pic and no mention how he addressed the oil system. The 350x engine is the same size as the 300ex engine and the 400ex engine is a bit bigger then that one.


http://www.3wheelerworldforums.com/showthread.php?t=70940&highlight=400ex+engine+350x

BigGreenMachine
03-02-2008, 10:35 PM
That could be. Someone somday will step up and do it.

welty83
06-24-2008, 03:24 PM
will a 300ex engine fit in a 200x frame??

83250r
06-25-2008, 09:46 AM
you say ( knew a guy who had a 570cc 350x......now it hardly finished a race ) why wouldent it finish a race brake downs???

droopie31
06-28-2008, 02:00 PM
I am pretty sure I'm not blowing smoke, but i do recall someone on the .org site made a complete new trike. He even posted a video of him beating around the yard a little bit while it was just a bare frame and a pop bottle gas tank lol. He never completely finished it, it was quite some time ago, so don't start hating if I am wrong.

droopie31
06-28-2008, 02:10 PM
http://www.3wheeler.org/vb/showthread.php?t=18688&highlight=400ex+trike

That should be the link to the build up, or atleast the main thread. I didn't go through all the pages again....hopefully it works for you all.


drew