PDA

View Full Version : 350x quistion



medinasonly200x
02-26-2008, 06:16 PM
i have a 350x front end on my 200x but BUT MY 350X AXLE END NUT IS SMOOTH ALL THE WAY AROUND IM GONNA FLATEN IT TO TAKE IT OUT BUT IM WONDERING IF MY OLD 200X AXLE AND HUB WILL FIT ON MY 350X FRONTEND :TrikesOwn

Dirtcrasher
02-29-2008, 07:37 PM
Almost all the axles and hubs take the same diameter and thread axle.

The shoulder of the axle is different and the realationship of the wheel to the caliper has to be shimmed on many of these swaps.

If you can't get a concrete answer, I suggest buying the right parts on EBAY, An axle and or hub don't cost much....

Isn't the 200X front hub a different bolt pattern than the 350X?? by a few mm's.....

medinasonly200x
03-02-2008, 09:56 PM
i just did it today to check it out but it seems odd im gonna wait for a nice day to ride it before i take it off but it sits sorta too high in the front but i dont know
yet