What 450R axle to run??

[Dirtcrasher]

At some point I'm gonna get a 450R swinger on my 350X.

I haven't heard the best things about Dura Blue and someone had trouble with another brand during installation - May have been Lonestar that was useless.

Not too sure about G Force as they are quite a bit cheaper.

I need strength, a bit more width (adj. would be sweet) and I don't want any more weight on this.

[brapp]

wel as far as the g force is better then sock but havent been aroudn them much to know wether they are lighter or strokger then stock btu it woudl give you the adjustability. but i have always run the rpm dominators on the mx bikes and had no major issues.

[jason85atc250r]

i have a lonestar +4 300ex axle on my 350x. it fit rite on with no problem. just have to use 300 sproclet and hubs

they will work fine for a 450r

[Dirtcrasher]

I grabbed a nice stocker CHEAP yesterday. At least now I can build a roller, see what I need to get and then sell or keep the stock axle. Thanks for the posts and I welcome posts on axle FEEDBACK!! :D

[Jason Hall]

Dirtcasher, This Is what I put on my 450. I love them, they were alot cheaper than a aftermarket axle. Another cool thing is If you trail ride alot like I do, you can take them off and put stock hubs on to narrow It up. The 450r, 400ex, 350x all have the same spline. It stinks that 250r hubs are different size & spline :wondering What was Honda thinking.

http://cgi.ebay.com/ebaymotors/G-force-extended-rear-hubs-TRX-450R-04-08-400-EX-99-08_W0QQitemZ120235632697QQcmdZViewItem?hash=item12 0235632697