Hi all

[snowwolf]

I had a 1984 125 tri moto given to me for free, can some one tell me where I can get a cylinder, crank, lift rod and piston?

[edog]

egay........

[3Wheelers4Life]

:welcome: to 3ww!
like edog said, try www.ebay.com
also, www.bikebandit.com
and post a wtb and in the classifieds.

[Vealmonkey]

What's wrong with the trike that you need all those parts? Is the bottom end or the top end shot? Usually a piston with rings, rebore of the cylinder does the trick. If you need to do the bottome end, you will have to split the cases which means you will need gaskets and seals and you might as well think of putting in new main bearings while you have it apart.

[Howdy]

Hi, Jim
Glad to see you could make it. ;)
Howdy

[snowwolf]

A buddy of mine tore my engine apart because the piston broke he took it to get the board and crank redone it was going too cost $250, but then he wanted to charge me over $2000.

[brapp]

thats just crazy man if you get the motor parts let me know i am always willign to help out a fellow board member. and wher eis cranberry pa?

[snowwolf]

North of pittsbrugh i did find a 1982 175 tri moto i pad $100. for it with carb.

[Eric250R]

:beer :welcome: :welcome: :welcome: :welcome: :TrikesOwn

[fred w]

denis kerk