PDA

View Full Version : Right Carb Choice?



Fierce
04-15-2008, 02:30 PM
I've been searching for a bigger carb to put on my 86 250r.

I've heard a lot of people recommend this carb. What do you think?
http://www.eddie-sanders-racing.com/oscmax/product_info.php?cPath=57_58_17&products_id=26

It has been ported and polished. Currently I've been running a bored out stock carb. I plan on dropping a 4mil stroker crank in her soon.

What's your opinion or recommendations?

evand
04-15-2008, 03:20 PM
i hear nothing but good things about PWK's :beer

Billy Golightly
04-15-2008, 08:51 PM
39mm PWK all the way.

Fierce
04-16-2008, 05:51 PM
Thanks for the input. I didn't want to go to big and suffer to much on the bottom. I was worried a 38 might be to big. I guess we'll find out.

EAT_A_450
04-16-2008, 08:57 PM
I've heard that a 38pwk off of a 00' cr250 with a 1368 needle from a 98' cr250 works great with the way that it is jetted. Anyone running that seup?

cr500=3wheeler
04-17-2008, 02:33 PM
I have a esr tmxx 41.5 mm carb that I will make some one a great deal on. but back to the topic I agree with billy 39mm unless you are a mx/woods rider than I would probably go with the 38 for a little better bottom , but if your looking for bottom end buy a 4 stroke!!!!!!

Fierce
04-18-2008, 04:32 AM
No it's a straight dune bike. Sounds like 39 it is then. No four strokes for me.