400ex vs 250r a-arms need some expertise

[Louis Mielke]

OK guys, I took the front end apart off my roommates 99 400ex to replace the bushings and the kit we got from Dennis kirk obviously won't work with these a-arms. They're +2 after market a-arms and I have no idea what brand they are.

Does anyone know if I should be looking for a 250r bushing kit or is it more likely these after market arms use a proprietary kit?

The lower arms have a good sized flange on the outsides of the brass bushings, but the upper arms don't have any flanges on the bushings.

I guess I'll get some pics if I have to but I have no idea how to figure out what bushings these arms need.

[jason85atc250r]

you need to get the a arm bushing kit for the type of arms they are. most companies use the same thing.

mike at HREATV almost has your 200x frame done and he should have a set of the bushings for the aftermarket a arms you have