Kawasaki ke 100 question

[cmracer15]

I drained the oil out of the tranny after i bought it,and filled it up with new oil. ( 10W-40) It took 2 quarts to fill to the top. My question is...was i suposed to fill it all the way to the cap???..cuz now in 3rd+ gears when i floor it the clutch slips....i was wonderin if it can have to much oil and cause this to happen?? does anyone know how much it is suposed to take??? its a 94 ..thanks

[TimSr]

2 quarts???? Yeah its WAY overfilled! Should take a 1/2 to 3/4. Most 2 strokes have a small phillips screw or bolt with 10mm head a little lower than half way up the side cover. You take that screw out, and fill til oil runs out the screw hole, and thats where you stop, and put the screw back in.

[yamaha200E]

haha haha haha im stupid when it copmes to motors on dirt bikes but i even knew that.kyle



please no one take this the wrong way im just saying that funny.

[NOS_350X]

ya almost all bikes have a little screw you unscrew and fill till the oil comes out that hole

[hondaATCrider]

hey man heres what you need to do with that hunk of trailprotrailprotrailprotrailpro you got......drain ALL of the oil out of the tranny and fill it up with some coolant and start er up. then when that damn thing starts slipin in third, ride that thing straight into a tree. then throw some gas on it and watch her burn.......then get ya a deere

[cmracer15]

HAHA..thanks guys. Ive never changed the oil on a bike trailprotrailpro mostly because this is only my second dirtbike. I drained the oil out of that hole by taking the screw out and laying it on its side...was that right??? or is there a drain on the bottom like most atv's??...i will drain the oil out tommorow and see if it runs any better. And for act ryder, How bout you quit postin stupid sh!t before someone rams a hunk of sh!t up your ass!..do you even have a bike? trike?quad?..or are you still riding the power wheels..geta life man!

[Macs]

yeah i hate people the laugh and poke fun when someone makes mistakes. grow up or leave.

[cmracer15]

Ummm ok ryder??? il take that into consideration. But learn how to spell exaust first. And why is everything a Nigger to you? there are no blacks on this board that i know of, but you still dont need to say it.

[J.D.]

Just ignore him, it's the same frikkin homo as whtieboy blackboy etc etc, he needs to be deleted (again???)

[NOS_350X]

just if you havent figured out yet drain the oil out of the one on the bottom hole then fill until oil comes out of the side one just thought i would post this just in case you didnt know yet

[cmracer15]

i did it yesterday when my new clutch cable came in. thanks nos. the clutch now grabbs AlOT better. thanks.

[NOS_350X]

welcome i try all i can to help and its good to know that you got it workin