PDA

View Full Version : who has Yamaha parts deals? or who has the hookup?


SYKO
12-12-2008, 09:14 PM
I need some rear end parts for a 07 250 big bear (yamaha)

https://www.bikebandit.com/partsbandit/basket.asp

thats a linc to the list of parts i need

if you can beat that I will buy!

:beer
The Goat
12-12-2008, 10:37 PM
you can't post like that syko....doesn't show what was in your cart.
SYKO
12-12-2008, 11:25 PM
does for me, even after I restarted my comp and cleared out my history...

edit anyway I need this for a 07 big bear 250

alll rear end bearings and seals

rear brake shoes

left rear hub
The Goat
12-12-2008, 11:48 PM
unless you went in and deleted every temp file...it'll work for ya. lol.

I lost my price book for my catalog...I've been ordering stuff blind to be honest. sorry I couldn't help.
Mosh
12-13-2008, 10:32 AM
How much will all of it cost you from them?
I think people forget that we are a parts dealer....
SYKO
12-13-2008, 10:47 AM
How much will all of it cost you from them?
I think people forget that we are a parts dealer....


well give me a price there mister partsy pants:p
SYKO
12-13-2008, 10:56 AM
its deffinatly a 07 big bear 250


edit used hub is fine as long as the splines are mint


http://i42.photobucket.com/albums/e306/southgacustoms/atv%20riding%20and%20racing/100_3715.jpg
Erics350x
12-13-2008, 10:57 AM
have you checked with servicehonda.com ?
SYKO
12-13-2008, 10:59 AM
have you checked with servicehonda.com ?


its a yamaha.... go back to bed Eric!:beer
Howdy
12-13-2008, 11:02 AM
its a yamaha.... go back to bed Eric!:beer

You must not deal with servicehonda.com then. They now sell parts for about every make and model. True 1 stop shopping.
Howdy
SYKO
12-13-2008, 11:04 AM
well now I need to go back to bed...

my bad

carry one then.
Mosh
12-13-2008, 11:23 AM
Ok found everything I think

These are all the OEM prices.
Except the brakes.

I can get you the brakes for aftermarket EBC for 32.95

I found I according to Yamaha cross reference, that 2006 Bigbear 400, takes the same rear bearings and seals.
All balls shows no aftermarket kit for your bike,but they do for the 2006 bigbear 400
If they are the same,I can get you a All Balls kit for $28.95,2 bearings 2 seals.

The hub would be 45.00 brand new Probably $30 used from my salvage yard.

Here is the OEM parts prices.

If you want all OEM stuff new, I could get
All the stuff I looked up shipped to you for about 125.00(without brakes)

Check this link and make sure I have everything looked up you need.

https://www.onlinemicrofiche.com/WPS/shoppingcart/CheckOut/Viewcart.asp

So aftermarket parts with a used Hub would be.... 100.00 plus about 10 bucks shipping to
you(with brakes).....I am not completely sure on the All balls kit fitting your bike.I would have to call them Monday and check.According to Yamaha they will interchange.

Or OEM New parts with EBC brakes would be about 158.00 shiped to you. A few bucks cheaper than Bike Bandit.
SYKO
12-13-2008, 11:34 AM
Ok let me get with him then the oem price is about 25 dollars cheaper then everything off bike bandit and the aftermarket is most likely the way hes going to go.
SYKO
12-13-2008, 02:54 PM
ok add this to a seperate list 1997 honda trx 300 2wd forutrax

air filer can be uni or aftermarket
oil filter
starter
rear brakes
and a air filter for a 02 400ex

I need those prices asap as well, I will get with you tonight or monday on parts ordering, can I pay pal you?
Mosh
12-13-2008, 08:37 PM
I will look into those also.

yes paypal works!
SYKO
12-15-2008, 09:04 PM
hey I need the updated prices homeslice!
SYKO
12-16-2008, 07:26 PM
Heeeellllloooooo Out There!!
SYKO
12-17-2008, 08:50 AM
hey! did you forget about me?
Trosar
12-25-2008, 12:41 AM
try yamaha of troy.. they always give you deals
ditchmud
12-25-2008, 01:01 AM
I am pretty lucky I bought my bearings from Detroit Ball Bearings here in my town. They are a large bearing dealer for industial aplications. I just took my bearings and seals in to them. They measured them and matched them up with a higher quality sealed bearing. I got better bearings and they were cheaper than getting stock ones from the dealer.
jason85atc250r
12-25-2008, 03:00 PM
ok add this to a seperate list 1997 honda trx 300 2wd forutrax

air filer can be uni or aftermarket
oil filter
starter
rear brakes
and a air filter for a 02 400ex

I need those prices asap as well, I will get with you tonight or monday on parts ordering, can I pay pal you?

i found out that oil filters you can get at Advance auto parts for $4 even comes with a new cover o ring also. they are made by Fram the car filter people.

just letting you know. thats where i get mine.
SYKO
12-25-2008, 05:35 PM
I am pretty lucky I bought my bearings from Detroit Ball Bearings here in my town. They are a large bearing dealer for industial aplications. I just took my bearings and seals in to them. They measured them and matched them up with a higher quality sealed bearing. I got better bearings and they were cheaper than getting stock ones from the dealer.



Ive done that in the past unforutunatly the kid ran the bearings out so bad there was nothing left to go by