View Full Version : 400ex carb ????
Erics350x
01-28-2009, 11:37 PM
When running WOT if i back off to half it falls on its face and comes back to life. Other than that it runs fine. Any ideas?
Tri-Z Pilot
01-28-2009, 11:55 PM
Float level set too high, or needle/main too rich? My theory is your feedin it a lot of fuel at WOT, and when you cut the throttle, the airflow is decreased and the motor chokes from the extra fuel till it clears out. Just a shot in the dark.
Erics350x
01-29-2009, 12:01 AM
The carb does overflow real easy. I'll have to tear into it i guess. What is stock jetting on the 400ex?
TravEX
01-30-2009, 09:52 PM
38/138, 3rd notch, if I remember correctly.
Yamada
01-30-2009, 10:33 PM
Maybe I'm a little off here, but my 225 was having the same symptoms until I replaced the pilot screw by the right one. So I would say to check the screw adjustement.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.