MY daughters QUAD build

[SYKO]

well after mucho searching and not really finding what I wanted I decided to build her a quad from stuff I had.

what started as a bare blaster frame ended up as a roller today thanx to the suspension parts off the ninja blaster when I got it

powerplant will not be a blaster motor at all or even 2 stroke, plans are to use a trx 200sx motor since its a auto clutch with reverse and electric start

I just tossed in a old 200x motor to see if I working room at least

after I get the correct motor in and mocked up and everything welded correctly I will blast all the componenets and girlie it up for here

I think this will be a great quad in the end for her since it will be lighter then the old 200sx was and hard to say have better suspension then the old 200sx

going to put some small lowprofile tires all the way around and nerfs with heel guards as well for her.


here is a start



http://i42.photobucket.com/albums/e306/southgacustoms/atv%20builds/mytruck396.jpg




:p

[cody2]

It's a shame to toss a blaster motor, there such tough little motors. I vote you keep the blaster motor, shes gonna have to learn to ride clutch sometime! Plus when she gets older you can just put some mods on it and it will be better then buying an all new bike.

[SYKO]

Well if you pay attention to my posts about my daughter she has JRA witch greatly affects her wrists and hands so she will never probably have a quad with a clutch untill she is older and thinks she can handle the extra strain.

All her machines I have to modifie the carb spring and the throttle spring to make the throttle super easy to push along with having the brakes near perfect so she dosnt have to pull that hard for them to work.

[Nick_R_23]

Something you may want to look into Syko if she really wants a clutch is a hydraulic clutch lever....Ive heard they are almost effortless to pull in.

-Nick :TrikesOwn

[SYKO]

that may be a way, but I'll worry about that when we get to that point im looking for this quad to last her at least 6 years or so now.

[cody2]

Oh, i never read into it, sorry for my ignorance.

[SYKO]

anyone got any spare blaster parts for el cheapo? need rear caliper, all the plastic lol ummm a decent front bumper and a carb to airbox boot

[factoryX]

I wonder if any of the powroll stuff will work.

[SYKO]

im not looking to make this thing a racer maybe some stuff later but not at first

[factoryX]

well when she gets bored of that motor...How far are you now?

[SYKO]

going to send out a MO monday for a motor and some other stuff

just scored a gas tank and rear shock for $2 localy!

$ 4 for a pair of foot pegs!

saweet!

[factoryX]

do you have the motor already? talk about a budget build....lol

[smokinwrench]

I have a set of blaster front shocks if you need them.

[Mosh]

Man I just tossed out a front a-arm and spindle set.Had it for years couldnt give it away.
Sorry.
Keep us posted.I hope it goes good for you guys.

[SYKO]

hey smoke If they feel good im interested, these are wore slap out

[scooterroo]

dude i got some purple plastics for the front of it for you. both tank cover and nose. pm your addy i will give them to yah.

[scooterroo]

and just think of the capabilities of the chassis alone on that thing. as she grows you can drop some coin and widen it up, perhaps and stretch it some with a +2 swiner and +1 forward arms up front... better shocks as well... could be one badass fourstroker.

[SYKO]

hey man thanx!!! wow!! awesome!! yea thats what im thinking it can be modded for years to come make it handle great and look great im looking for it to last her till shes around 16 or so or longer.

[smokinwrench]

You can just have the shocks for the price of shipping. Send me your info if you want and I'll get them in the mail sometime.

[factoryX]

some parts just popped up next to me.

http://bend.craigslist.org/mcy/1074911508.html

[SYKO]

hey factory make him an offer plz!! let me know and I will paypal you the money! it should all ship in a $12 usps priority box!

[smokinwrench]

This is a ways from me but maybe he would ship. Look pink to me.

http://wichita.craigslist.org/mcy/1112099338.html

[factoryX]

I sent a message but no reply yet, I sent a message 3 days ago.

[LonesomeTriZ]

I get the strange feeling I have seen that frame before.

[LonesomeTriZ]

Are you going to keep the cable brakes on there. If not, I think I can help you out with a hydro rear caliper off a Z.

[SYKO]

naw keeping the cables.... Ive learned how to adjust the blaster brakes to work well

[LonesomeTriZ]

I think I all my parts went when I sold the Blaster. You will most likely have this done before I go home again, but if not I will dig around and see what I can come up with.

By the way, why didn't what's his name do the frame swap on the blaster? That is all it needed?

[SYKO]

hes a dummy thats why

[LonesomeTriZ]

Such a shame.

[SYKO]

lol its aight he does take care of it like it was a super model though.... lol!

[LonesomeTriZ]

I wish I could have finished it. it would have been impressive considering what it is.

I think, do not quote me, but I think we may have some plastic that would work for your biuld.

[SYKO]

well I got a junk 200sx motor from a freind of mine... it wont work in the frame its WAY to tall and if you got it to sit lower it would have major chain alignment issues, so im on the hunt for a 200e or 200m motor, something with electric start so she can hop on and take off or if any one has a goki kit for the 185-200s motors let me know!!!! plz!!!

[LonesomeTriZ]

Have you thought about locating YTM/YFM engine with electric start?

[SYKO]

naw....not even attempting to get one of those for it, its easier to find a honda motor and parts are easier and cheaper as well... no offense...

[LonesomeTriZ]

That is becuase the Yamahas are still running. DOH!

[SYKO]

yea cuz there to slow and ugly for any one to want to ride them!

[LonesomeTriZ]

What happened to that carcass you had under the awning behind the old Chevy? Wasn't that a 225?

[SYKO]

that was my naighbors quad

[Yamada]

Actually a ytm-200 will walk away from any pre-86 Honda 200cc engine. I think it was Swigin that say that when he drag raced his ytm again a 200x he was winning race...

[LonesomeTriZ]

That is what I was thinking as well. but I do agree that Honda stuff is cheaper and easier to get.

[LonesomeTriZ]

I cannot tell if it is chain or shaft driven.

http://cgi.ebay.com/ebaymotors/Yamaha-ytm-200-atc-motor-engine_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1171Q7c66Q 3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c29 3Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZi tem150338572663QQitemZ150338572663QQptZMotorsQ5fCa rQ5fTruckQ5fPartsQ5fAccessories

[Yamada]

But the problem is that the chain driven ytm-200 don't have electric starter.

Lonesometri-z, I think the engine you find is from a chain driven ytm-200. The decompression lever on the head is supposed to be connected to a cable. The shaft driven 200 just have a black handle for the decompresion lever. Also the No electric starter tell me it is a chain driven engine.

[LonesomeTriZ]

Well, so much for that idea. I have been out of the game for so long I cannot remember anything about them.

[Erics350x]

sounds like a 300ex might be better suited

[200xman]

I have a mostly complete 200M engine that you can have, just pay shipping. I think it's a 84 and ran when I pulled it. Let me know if you're interested and I can get more details/pics.

[SYKO]

hell yea! let me know!!!!!!! plz!!!!!!! AWESOME THANKYOU!

[200xman]

I sent you a PM with my #. Give a shout.

[SYKO]

I sent you a PM with my #. Give a shout.

u pm'ed me????? geezz.. im a tard... u did didnt you... lol I'l try to give you a shout later! thanx!

[factoryX]

how is this going?

[SYKO]

nothing right now im broke so I cant afford the shipping on the motor right this minute give me a month and I will get back on it

[SYKO]

well thanx to a gracious member my daughters quad has a engine!! a 200m motor! so she will have an auto clutch with electric start!

I worked on making most of the headpipe allready, I still need a carb for it all te plastics and some sort of hydraulic disc brake front spindles as cables will be way to hard for her to pull.

the rear end I swaped out with a tri-z swinger and axle for length and width plus hydraulic disc brakes as well

all I need to do is fab up some simple motor mounts and a couple other frame mods and its going!

if any one has any front hydraulic spindles they want to chunk I will be more then happy to take them for her quad!!! Ill post pics maybe friday or something.

[SYKO]

well crap.... ive been trying to make so much work and fit on this thing that I consider it an abortion... im abandening ship!!! I got a more suitable chassis that things will work out in now!! will post pics hopefully sunday night!

[oldskool83]

warrior chassis?

[SYKO]

no that would be way to heavy to house a 200 motor plus it would be to big for her.... lets just say..... a trike WAS harmed in this build!

[oscarmayer]

hey syko, i can get ya carb if ya need one. i got liek 1 or 2 spares.

also i know a guy that does the chinese kiddyquads and i can probebly get you a full spindle and brake combo for cheap! (cable fronts but they would be new and working good)

[SYKO]

IM MAKING MY OWN ASTRO KIT!!

cut the blaster front end off and will run the stearing tube through the neck on the 200x, mate the frames together and walla!! I figured race cut blaster front fender cut to bolt to the sides of the 200x tank will work just fine:naughty:




http://i42.photobucket.com/albums/e306/southgacustoms/atv%20builds/1049.jpg
http://i42.photobucket.com/albums/e306/southgacustoms/atv%20builds/1050.jpg

[oldskool83]

WTF!!!!!!!! i like it haha.

[Thorpe]

Oh no.... Well, I will wait and see... I like your pickup, so I will give this hope... :naughty:

[factoryX]

this was a better Idea, I mean the blaster swing arm is no match for this one.