//ArrowChat Code

125m help!!!

  1. Sthrnrdnk
    Sthrnrdnk
    I have a atc 125m that i put a brand new piranha 140 on it and im not abke to kick it because the rear tire is in the way, what axles can i use for this build? Also if i cant use a different axle cdoes anybody offer spacers?
  2. Black_Widow
    Black_Widow
    There are several dealers that offer kits to add a pull start to the left side case and just not use the kickstarter on the right... that's what I've seen the most of. Here's one: http://dratv.com/atpustkit.html from Dr. ATV with a how-to. You can find spacers to move the wheels out, you likely have 4/130 rims if they are the stock wheels/hubs, but you would have to move them pretty far out and I think the kickstarter would still be hard to use with the plastics in the way. I think you'd have to remove the rear fender to kick it, but I'm not sure. anyways, push starting is the free option, best of luck!
  3. Sthrnrdnk
    Sthrnrdnk
    I appreciate the imput, i would idealy like to widen the axle or hubs so i can use the kickstart, and i would take the plastics off to kickit and put them back on when running! Trying to find ANY info on 125m's is nearly impossible! I had to do a good bit of fab work just to get the frame to house the 140 engine! Once again thanks for the imput every little bit helps!
Results 1 to 3 of 3
//ArrowChat Integreation Code //