so I started on the dreaded modded 500 kicker... I had the blaster kicker that everyone likes to mod to work but didnt want to use it.... and digging throug a box of about 50 kickers I have accumulated over the years I came across a steel kicker that fit the 500 knuckle! what machine did it come off of? a second gen 250R! will a but of grinding and welding It will work nearly perfect! I will post some pics of how well it will work starting tomorow.
sorry it took so long to get pics tucks in nicely to the engine when not in use folds out nicely and wide and then kicks all the way down and clears the frame (just barely) and stops on the swinger bolt tab, I plan on welding a stop on the side of the frame, I will also take and put a brake peddel in to see how it clears wich from the judge of things should clear a stock peddle so I kicked it over a few times and with this kicker on it I could get some serious kicks in so it should be fairly easy to start when needed.
nice job man.. we know what a pain they are to start