//ArrowChat Code
  • 3WW Shop Banner

  • Recent Forum Posts

    DAM shop

    Piston wrist pin plugs

    Tore into a 90 motor we picked up, pulled the top end, found a sleeved cylinder and the Piston had plugs in the wrist pin holes instead of clips. What brand of Piston is this?
    259394

    DAM shop 07-23-2019, 07:45 PM Go to last post
    Gabriel

    Not saying that's not possible. I'm sure it is,...

    Not saying that's not possible. I'm sure it is, but I just had that part from a 200S in my hand not three days ago, as that's the bottom end I am currently building. There's a flange on the bearing...

    Gabriel 07-23-2019, 03:24 PM Go to last post
    shortline10

    Sounds like the one way clutch bearing was...

    Sounds like the one way clutch bearing was installed backwards or improperly.
    Part number 14 in the pictures

    https://www.partzilla.com/catalog/honda/atv/1981/atc185s-a/one-way-clutch

    shortline10 07-23-2019, 02:47 PM Go to last post
    Gabriel

    When's the last time you adjusted the clutches?...

    When's the last time you adjusted the clutches?
    Did the "WORK" you had done involve the person adjusting the clutches?

    It's very easy to adjust them but also very easy to do it wrong.

    Gabriel 07-23-2019, 02:12 PM Go to last post
    trevorakm

    Okay so back and finished. Sorry I didn't take...

    Okay so back and finished. Sorry I didn't take pics as I wanted it done and that would have slowed the process. I will tell you my results.

    First I removed the new bearing from the post.
    I then...

    trevorakm 07-23-2019, 01:55 PM Go to last post
//ArrowChat Integreation Code //