Owner: Chris Clarke
Model: Blaster
Make: Yamaha
Year: 2002
Modifications: "Updated 11/16/03" Msr Dominator Bars, Scott Hurricane Grips, Yamaha Tether Killswitch, Halogen Headlights, AC Dirtscreen Bumper, DG Alloy Nerfs, DG Superlight Grab Bar, 20x10x8 Titan Fast Trekkers (studded for winter), 20x11x8 GBC Sand Sharks on Douglas .190s, Cut Fenders, Chrome Toomey Pipe/Silencer, UNI Dual Stage Air Filter, No Air Box Lid, 310 Main Jet, Painted/Polished Parts + more that i can't remember.
__________________________________________________________

Owner: Preston Smith
Model: ATC200x
Make: Honda
Year: 1984
Modifications: my trike before I tore it apart for all the powdercoating I am getting done.,.... In these pics mods consist of a motor bore of 50 over, a +4 in extended swingarm, and a supertrapp exhaust... I did the seat upholstry... And it has a 250R front fender... Meijer plastics in back....
__________________________________________________________

Owner: OldSchoolin86
Model: TRX400EX
Make: Honda
Year: 2002
Modifications: Pro Circuit T4 slip on, K&N air filter, Dynojet kit, WB front bumper and nerfs, TAG T2 fat bar kit, and of course cut front fenders.
__________________________________________________________

Owner: Krix Koggs -Oregon USA
Model: ATC350X
Make: Honda
Year: 1985
Modifications: Completely restored from the ground up! Every nut and bolt has been either polished or replaced. Cept for a jetted carb, the motor is stock and runs great. Powdercoated frame, K&N ait filter, 20x11x10 Paddle Masters on Douglas Wheels, DG Xccellerator (on backorder) is next. Other than that, there's been a little bit of paint and lotza elbow grease! I imagine during the winter I'll have the swing arm powdercoated, but we'll have to wait and see bout that.
__________________________________________________________

Owner: Robert Miller
Model: Tri-Z
Make: Yamaha
Year: 1986
Modifications: all of the wrench report work done to it . it has the basani pipe , .20 over piston , head milled , exaust port opened up 2mm , two larger boost ports , larger carb , but the factory air box. it also has a trist throttle , and a custom extra gas tank that fits where the air box goes (although that is not on the machine). all the suspention work in the wrench report has been done as well. it now has a new clutch , kicker , and rear shock. when i bought it i paid $400 for it . it came with the original pipe in a box , as well as the original thumb throttle , carb , and custom airbox , a brand new set of dick cepeck paddles on mitchel wheels , new desert tires , three sets of good used tires on rims , and 2 custom extra gas tanks with covers (that fit where the airbox goes). somebody loved this jewel at one time . now that somebody is me .(just ask my wife!)
__________________________________________________________

Owner: Nick Lalanne (NOS_350X)
Model: 350x
Make: Honda
Year: 1985/86
Modifications: white fenders, 85 frame 86 engine, just had a valve job, its mostly stock. I also have 3 110's (83, 82, and 81). A 83 200x that's my brothers but I maintain it, and my baby a 98 YZ 125.
__________________________________________________________

Owner: Brad Bowen ( Polarisman )
Model:250r/es Scrambler
Make: Polaris
Year: 1985
Modifications: Well on your site I couldn't see a Polaris Scrambler so I thought I would send you a couple of pics of the one I just got. She has been mistreated a bit, but now she is in good hands. I have restored 4 Generation 1 Polaris ATVs and this is my latest project. It looks like the ATV should be blue with a black seat, but the tank is also supposed to be black. She also should have a front rack and may at one point have had an air filter. Thanks to the prior owner for that home repair!.
__________________________________________________________

There is 2 pictures above here. Top and bottom )

Owners: TEAM VINTAGE ( ATC4LIFES / Xfiles )
Model: 350x
Make: Honda
Year: 1985/86
Modifications: the mods are as follows: ATC4LIFES's(thats me with my dog) 86'250r has durablue +4 axle,LSR bearing carreir,bored .30 over,boyseen reeds headlight guard dominator bars, alloy grab bar, and FMF fatty pipe and Pwr core II silencer. And my 86'200x has moose bars,triZ headlight assembly w/guard,red maier rears, 22/11/10 All Traks, cobra silencer and Alloy grab bar.
Xfiles trikes: 85' 250r&85'350x. 250R mods: FMF fatty pipe &Pwr core II silencer and 18/11/9 Turf tamer wheel kit. 350X mods: motor is bored to a 400cc,Cobra exhaust, race cam, 20/11/9 Turf tamer wheel kit, bark busters, Custom alloy grab bar,and honda light guard and more. Other two 85' 350X's are pretty much stock,and the other 86' 250R(not shown) has a durablue +4 axle, renthal bars bored over .30, PSI pipe and silencer. There is also an 84' 250 Tecate (not shown because he wont take it out of his bedroom) with a polished motor, plated bolts, and other goodies, but not finished restoring yet. a couple of 90cc's and a tri-zinger are the rest of the toys for now.
__________________________________________________________

Owner: Howie Criger
Model: Tri-Z 250
Make: Yamaha
Year: 1986
Modifications: Bored .75 over, Wiseco Piston Kit, Full DG Exhaust, Spider Trac rear tires mounted on ITP .190 Aluminum rims, Durablue Eliminator Axle, Acerbis Bark Busters
He keeps it super clean and as you can see in the on picture we made a little front end modification to accomodate for the deep snow we've had here in Jersey.
__________________________________________________________