Readers Rigs-Page 15
Owner: Paul Cordes (VABCH350X)
Model: 350x & ALT50
Make: Honda & Suzuki
Year: 1986 & 1983
Modifications: Sanded and Buffed the rear fenders on the 350X, otherwise stock. ALT50 has no mods.
__________________________________________________________
Owner: Jeremy Parsons (JDParsons1)
Model: 200X
Make: Honda
Year: 1984
Modifications:
DG Krome Power Exhaust, 115 Main Jet Detonator Handle Bars, 18" Turf Tamers.
__________________________________________________________
Owner: Andre Bourassa
Model: ATC110
Make: Honda
Year: 1984
Modifications: Custom fenders(5 gallon pail), chopper handle bars, custom exaust, the front wheel is a back wheel.
__________________________________________________________
Owner: Jeff (Red Rider)
Model: ATC250R
Make: Honda
Year: 1986
Modifications: 1990 CR250R cylinder, bottom end has been modified to enable it to actuate the cylinder's power valves, Keihin 38mm PJ series carburetor, FMF Ram Valve, FMF Gold Series pipe, DG Type II silencer, K&N airfilter, & a few trick aluminum parts.
__________________________________________________________
Owner: Jeff Bardshar (JBKX)
Model: KXT250B1 Tecate
Make: Kawasaki
Year: 1986
Modifications: Bought new in 1987, + 6" westcoast swingarm, Trinity Stage 2 motor, Custom built exhaust, 93 KX250 Boysen Rad valve, 39mm Keihen PWK carb, Lots of chrome.
__________________________________________________________
Owner: Jeff Bardshar (JBKX)
Model: ATC250R
Make: Honda
Year: 1982
Modifications: No major mods just broke it down to the frame and went back together with all new stuff.
__________________________________________________________
Owner: Darius M. Barazandeh (Darius1502)
Model: Tri-Z
Make: Yamaha
Year: 1986
Modifications: He bought it as someone's left over project. The guy had it all in boxes and had given up on putting it together.
He bought it for $700 plus the guy gave him about $550 dollars of spare parts (ebay value of course). He started off getting the frame painted, buying new plastics, new
fork boots, getting decals made for it, and replacing all the bearings. Another interesting thing was that he had the airbox cap painted with 'flex coat' paint.
Since they are no longer available he decided to have this done. It was done by a professional and has 4 coats of clear. Also the gas tank gaurd is chrome plated and
the shock knob is gold plated. Lastly, he has banshee rear hubs and rear rims on it. It will see action in the sand dunes only.
__________________________________________________________
Owner: Peter Farrell
Model: Fourtrax 250
Make: Honda
Year: 1985
Modifications: Cherry bomb, k and n air filter....does about 108km/ph
__________________________________________________________
Owner: Evan Cassidy
Model: ATC200X
Make: Honda
Year: 1984
Modifications: K & N filter
XR200 carb
DG header and pipe
350x front maier fender and 200x maier back
10.25 to 1 piston(12:1 goin in it)
older cr250 rear shock
White Bros cam
MSR bars
Barrnett Clutches
Ride Red or Go Home!!!
__________________________________________________________
Owner: Lance
Model: ATC350X
Make: Honda
Year: 1986
Modifications: Everything is brand new from honda, I also have the chrome triple trees and chrome swing arm...over 6400.00 invested.
__________________________________________________________
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Page 29
Page 30
Page 31
|
