First Time Rider
Arm chair racerNew to the board
i NEED a blasting cabinet. i looked at harbor freight and all of them require 10 CFM at 90 PSI. that's a lot of CFM. i don't want to have to buy a $1000 compressor too. does anybody know of a blasting cabinet that will operate at lower CFM? i'll have to check but i think my compressor only pumps out 4-5 CFM at 90 PSI.
Power User
Roostin Away
You can run it at the lower CFM but you're not going to be able to do large parts without taking a lot of breaks.
1985 Eddie Sanders ATC330r
1986 Monstecate
1984 ATC70 (awaiting 125cc transplant)
1984 ATC125M
1986 GSXR 750 - Keepin' it old school!
1999 Arctic Cat 500 4x4 plow machine
1999 Arctic Cat Thundercat 1000 (lake lizard)
1996 Arctic Cat Jag 440 L/C (ditch banger)
First Time Rider
Arm chair racerNew to the board
The largest thing I would need to blast would be a tank or engine
Roostin' Away
Arm chair racerRoostin Away
I got a compressor from Home Depot. It is a Husky 60 gallon tank 220 electric and puts out around 11cfm at 90. Cost less than $400.00. Works great with my two cabinets.
85 Big Red
83 Big Red
84 125m
85 TRX 125
73 ATC 70
Reply With Quote