Tf swap meet???

[big specht]

Lets get a thread started post up what you want to sell there and what you are looking for.

[jeswinehart]

Really only wanting to BARTER, not so much to sell,,, my reproduction Tecate parts (intakes, sliders, flywheels) for tectae parts.
Going to be looking for handle bars, handle bar left side eletrical controls, perhaps a full wire loom and head light assembly to name a few parts.
Other things that may be of interest: 25Or / 250 TriZ tach, one set of rear tires and a few other items that I am not sure what thet will be yet.
Basically only looking for Tecate stuff and to barter since it is alot more fun then just money IMO.

john

[Tecate 50]

Bringing 1986 Tecate parts: Frame, swingarm, front rim with Front Max tire, axle (re-plated), hubs, forks, 2 front fenders and some mics. parts!

[big specht]

john what years Tecate

[jeswinehart]

Parts I would be looking for are the 84/85 T-3. Parts I have to offer up are 84 thru 87 T-3.
yeah, I should have put that in type the first time. Thanks

[nitrodude81r]

If anyones interested I will bring some 200x parts (axle, swingarm, sprocket and brake hubs) and whatever else I can find.

[big specht]

I'm looking for some blue 225 tank sheilds

[ATC-Eric]

Mr. John, I am interested in a Tri-Z tach possibly........

[jeswinehart]

My "want list" for my 85 Tecate project is pretty much complete and is as follows.
Complete air box assembly
Complete head light assembly
Engine gasket kit (can mix and match from other guys left over kits if we can get organized on that ?)
Complete left handle bar electrical controls assembly (on/off-light switch)
1 header exhaust spring
Handle bars
2 stock air box/intake boot hose clamps
Rear axle
Primary sprocket chain guard cover (bolts on the motor)
Rear brake master cylinder (don't need hoses or banjo bolt)
Coffee can of stock metric nuts/bolts/washers from a T-3 part out or just left overs.
I will get pics of what I have to barter with later on in the day and post up separately.

Thanks guys ! john

[jeswinehart]

Stuff I will have @ TF2010 with possible exception of the green front fender and or the 38mm carb.
*** fender is for cattle dog to either use on his T-3 or to barter with for the RED rear fenders he is wanting ***
*** carb also might go to cattle dog if he can use ***
*** ALL Tecate stuff with exception to the tachs (R and Z) ***
Any questions, comments or what ever will NOT be answered here to keep the postings (at least related to my stuff) only to NEED and HAVE stuff able to go to TF2010.
You are welcome to PM me.
Great idea big specht !

Thanks folks, john

[3Razors]

Who has the email for that guy in Germany that makes repro tecate stuff? He called me about a Tecate rear fender brace that I would like to pick up at trikefest, but I don't have contact info to him.

[big specht]

This is all that is going to be there for sale ????? I figured there would be more , I just need to know so I can leave extra space in the trailer

[jensenracing77]

i think i am going to bring my 350X to sell. it is a pile but it runs
i also have 73 and 74 ATC 70 parts that i am thinking about bringing. i will also try to sell my fast ATC70 also. i will want $800 for my 70. i have a local guy wanting it but he has not brought any money. if there is anything you need for a 73 or 74 atc 70 let me know and i will be sure to bring it, frames, forks, back covers..... i do not have any exhaust, recoils, back bars or skid plates.

[ATC-Eric]

How much will you want for the 350x? If the price is right, I will take it off your hands.

[Itrike]

Stuff to trade /sell
Triz 85 parts
front fender, head light , tail light , engine casses , shrouds , foot pegs
250r parts
83/84 seat , 85 running engine (I might part out the hole trike)
Will have a few sets of wheels (honda)
Might sell 87 200x ,and my 86 200s

things I need
85 250r frame , swing arm bolt for 85 250r
A good 350x frame , running engine for 350x