i am havin trouble getting this thing to run. i am a 4 stroke guy, how exactly should the carb be adjusted and do i just run normal gas in it? what kinda of oil do i use? and what was the best manual they made?
i am havin trouble getting this thing to run. i am a 4 stroke guy, how exactly should the carb be adjusted and do i just run normal gas in it? what kinda of oil do i use? and what was the best manual they made?
1974 atc 90 project underway cuzzztom
1985 atc 110 for sale
84 200s all original got off the first and only owner
new carb
maybe putting my 200x cam in it but not sure
old trike
1985 200x
12.1 piston
oil cooler kit
white bors cam
super trapp exhaust
uni clamp on air filter
350x front end
There fun!! They ran oil injection if i remember right, tank should be under one of the side pannels, Check to see if the pump is still hooked up also, If not Run pre-mix and make sure the little port on the intake tract for the old oil line is plugged. Run 10-30 in the trans, Start with 1.5 turns on the air-screw 3 on the idle screw, and the slide needle Have the E clip in the middle notch...should get you close, Also New sparkplug!!!
1985 Tri-Z-
Originally Posted by mywifeknowseverything
haha that was my 1st dirtbike i ever had after a couple small minibikes .. think mine was a 85 or 86 that thing was a blast and after i put a aftermarket silencer on it , it really opened her up ... TONS OF FUN !!!
MY BABY RIGHT HERE !!! LOL
86 200x
86 250r 265cc kit
86 225dr
85 250r nice rider
85 tecate
85 atc 70
83 250R bone stock
88 cr 125
84 klt 110
99 yz 125 1st race bike
02 ktm 125sx 2nd race bike