//ArrowChat Code
Results 1 to 2 of 2

Thread: 01 yz125 cluthing issue

  1. 11-18-2010, 01:38 AM #1
    broncocarnage
    broncocarnage is offline New to the board Arm chair racerNew to the board
    Join Date
    Feb 2008
    Location
    Texas City, Tx
    --
    27

    01 yz125 cluthing issue

    ok i have a 01 yz125, im not real familiar with this bike at all and i have never seen this problem before!

    i replaced the clutch lever on the handle bars and now the clutch will not disengage? what is the problem? it wont even disengage by rotating the shaft out of the clutch cover? please help!
    82 Honda 250r
    84 Kawasaki tecate 250 SOLD
    84 Honda 200es Big Red SOLD
    85 Honda ATC 250es big red
    85 Honda fl350r odyssey with a 400 big bore kit. SOLD
    85 Honda 250 fourtrax
    01 Yamaha yz125 with 140bbk & other mods
    07 Honda 500fm fourman with IRS, 515bbk, 30%gear redution and 29.5 outlaws and other mods
    Reply With Quote Reply With Quote
  2. 11-19-2010, 07:55 PM #2
    dirtjunkie85
    dirtjunkie85 is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    May 2010
    Location
    Utah
    --
    230
    Try removing the cable and just pulling on the arm. Just check one thing at a time, if it will disengage without the cable its obviously a cable problem if not check the push rod,springs ect. and see whats up. good luck sorry i wasnt a ton of help.
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //