Results 1 to 11 of 11

Thread: 200sx engine swap? 86-87 auto-x?

  1. #1
    Join Date
    Dec 2009
    Location
    BFE
    --
    1,202

    200sx engine swap? 86-87 auto-x?

    I know the 200sx is a quad and maybe I should have posted this in the quad section but sense it is intended to be swapped into a trike I think its fit for trikesylvania. Ok does anyone have any experience with the 200sx engines? They are very similar to the 185/200 engines but have a few differences there chain drive,have reverse,no low range,and electric start tucked up close to the back of the cylinder. The head on them looks different too but im not sure if its just visual and not mechanicaly different. So back to the point I think this would be a sweet little engine to use for a auto-x conversion! Anyone used this engine in a trike??
    Last edited by swampthang; 02-01-2011 at 12:43 PM.
    "I'm Kind Of Like The Turtle Man Of 3Wheelers."

    1986 Honda 350X
    1985 Honda 250R
    1985 Honda 200X

  2. #2
    Join Date
    Apr 2006
    Location
    London Ontario, Canada
    --
    1,197
    I don't think they would be a direct bolt in for the '83-85 200x. They might fit the '86-87 200x frame, but I'm not 100% sure.
    Tapper
    R.I.P. Sandpuppie, you are greatly missed!
    May you rest in peace Jeswinehart, deeply missed, never forgotten....
    Feedback thread http://www.3wheelerworld.com/showthr...ight=tapper190

  3. #3
    Join Date
    Feb 2009
    Location
    Rome,NY
    --
    1,046
    I say if you have it give it a shot ... a auto-x with reverse would be sweet... are they electric start too?
    Last edited by KILLER; 54 Minutes Ago at 06:17 PM. Reason: beer

  4. #4
    Join Date
    Oct 2010
    Location
    Tucson
    --
    1,652
    Quote Originally Posted by AutoXer View Post
    I say if you have it give it a shot ... a auto-x with reverse would be sweet... are they electric start too?
    Yep they are electric start, I just put one in a golf cart! Sweet little motors...

  5. #5
    Join Date
    Dec 2010
    Location
    washington state
    --
    681
    yes they are electric start and themoter is based on the 86-87 200x ,with the auto clucth and reverse insteadof 6th gear they should fit in a 86-87 x without to much trouble ,have a project like this in the wings just haven't had time to start on it ,good luck post pics if you get started on this .
    GOT MUD?:

  6. #6
    Join Date
    Dec 2009
    Location
    BFE
    --
    1,202
    I think I may have found a 86-87 200x roller for $150 so we'll see. Second gen auto-x sounds sweet to me. Just had this vision last night looking at a 200sx on CL and it got my gears in my head turning.
    "I'm Kind Of Like The Turtle Man Of 3Wheelers."

    1986 Honda 350X
    1985 Honda 250R
    1985 Honda 200X

  7. #7
    Join Date
    Dec 2010
    Location
    washington state
    --
    681
    yup, good auto-x with reverse and electric start , sounds like a nice one!!
    GOT MUD?:

  8. #8
    Join Date
    Dec 2009
    Location
    BFE
    --
    1,202
    anyone on here have a 200sx quad? shed alittle info on these things. hows the power comparied to a 200x?
    "I'm Kind Of Like The Turtle Man Of 3Wheelers."

    1986 Honda 350X
    1985 Honda 250R
    1985 Honda 200X

  9. #9
    Join Date
    Mar 2005
    Location
    overton, PA
    --
    5,257
    they have decent power great little quads but had chains issuesinthe first 2 years of them but still great quads. should be plenty of fun
    ok here goes, 85 atc70,2 84 atc70's 83 alt50,83 atc110 , 70 us 90 parot green, 85/86 350x garage queen, stock rider 85 350x, project 85 350x 85 250r drag bike, 2 85 250sx's, alt185, , scat tracker?99blaster,85 250r rider,85 250r ice racer project ,93 kx500,99 xr200r, 91 dr250s ,89 lt500 quadzilla,88 lt250quadracer, 88 trx250r race full on race quad,, 01 yamahakodiak400, kawaki kd100,lt50 for my doughters,93 300ex, 230 quadsport, lt185, lt250 quadrunner,84200s, is that enough?

  10. #10
    Join Date
    Dec 2010
    Location
    washington state
    --
    681
    the 200sx has decent power for its size but is not real fast ,gearing , the main issue with the chain is no maintance or to many donuts will couse it to come loose and hit the case very commen to find the case has JB on it you can make a custom casesaver . mine gets used a lot everyone seems to like the little quad!
    GOT MUD?:

  11. #11
    Join Date
    Oct 2010
    Location
    Northern, California US
    --
    105
    I am in process of building one right know. The 200sx motor fits with very little modifications, I couldn't tell how it performs as it's not finished yet but hopefully soon.

//ArrowChat Integreation Code //