//ArrowChat Code
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 17

Thread: WOW! a wealth of parts! check this out!

  1. #1
    Join Date
    May 2011
    Location
    Foothills of the Adirondacks
    --
    104

    WOW! a wealth of parts! check this out!

    Selling a decade collection of Honda ATC aftermarket + nice OEM parts - $50 (canastota ny 13032)

    After over a decade of collecting hoarding and building vintage 3 wheelers, im changing my hobby dirrection towards off road lifted trucks.. So its time to part with most my collection of cool rare parts from over the last ten years of being a parts whore hoarder.. Ive got from nice clean OEM to NOS OEM to NOS aftermarket to used hard to find aftermarket to run of the mill everyday average find trike parts..

    first is my old skool ATC90 race bike build project.. I have aquired every part to build an entire ATC90 with 90% vintage new and used aftermarket parts. when built it will be a completely aftermarket ATC90 replica from the late 70s.. Here is a list bandito tube frame, chrome HD forks with dual axle positions, PCCC suspended front end tripple clamps and forks, HD stock length axle i think is a NASA, 2.5 inch billet H&S 3 bolt hub spacers, a super rare galvinized Webco Inc motor skid plate, CMP brush gaurg / nerf bars, 3 sets of PCCC Turbo two piece aluminam wheel halfs (12 wheels halfs four are 3 on 100 and eight are 4 on 130 bolt pattern), 2 NOS malcolm Smith polished alum rim halfs 3 on 100, basanni super trap and hooker header exhausts, NOS BARP Big Als streaker cams, intakes, vented dip stick crank case vents, NOS finned tappet covers, chrome six pac racs, ciebe baja desert light, NOS vented front fenders, vented Maire number plates with bolt on numbers, over sized carbs with matchen intakes like POSA BARP and unknowns, NOS PCCC chain tensioner, NOS oil cooler kit, NOS BARP 7/8 steel slip on pegs, allen head bolt kits tail lite lens and intakes, 16 in burris flat track tires, polished dick cepek rims anodized gold mithells..ect..ect..ect

    reproduction Hondaline stripe kit sticker sheets, 22 stickers per sheet less than only ten sheets left.. $75 shipped

    1987 J arm banshee parts
    roll design +2+2 arms for the j arm frame--sold
    LSR.. Lone Star Racen +2 chrome swinger with acentric dual row bearing carrier
    red and yellow race cut front and rear fenders
    seat
    working front brakes,
    steel dg nerfs
    FMFs--sold
    rear axle
    steering steem

    1987 honda 250X motor and complete frontend parts

    NOS new old stock Maire fenders all old school dull finish, plus other NOS aftermarket 3wheeler bolt ons..

    85-86 TRI-Z yellow
    2 rear low pro
    3 vented front
    1 set rad shrouds--sold
    1 set fork gaurds--sold
    1 vented mesh number plate--sold

    84-85 tecate fat tire t3

    2 fronts 1 red 1 green--sold
    1 set of green fork gaurds for drum and small disk--sold

    86-87 tecate

    green fork gaurds--sold

    81-82 250R

    Red vented maire num plate--sold
    Big Als chrome six pack rack bolt on grab bar new in box
    Sand Scorcher Big Chrome head light gaurd
    NOS WHITE MAIERS
    1 low pro rears--sold
    1 reg rears

    83-84 250R white

    3 low pro rears
    4 vented fronts
    3 reg fronts
    1 set fork gaurds--sold
    2 set of super scoops--sold
    3 plastic short track tanks

    83-84 250R red

    1 set fork gaurds--sold
    2 sets super scoops--sold
    2 plastic short track tanks
    4 NOS head light gaurd and mounts

    atc90 older 110

    1 red 1 white vented front fender

    85-86 250R

    3 sets red rad shrouds
    1 red 4 gal tank--sold
    1 white 4 gal tank--sold

    Honda atc185 200e m s fat tire trikes
    6 white front fenders

    Custom vinyle gas tank covers for first gen 200x 200s 250sx and 85-86 250R, any color and carbon fiber

    12 NOS aftermarket light gaurds not hondaline both generations of aircooled 250r, both gen 200x, 250SX

    used clean OEM and used aftermarket trike parts


    1985 86 87 ATC250SX
    red oem light and new gaurd--sold
    front rear racks--sold
    ignition switch dash key and helmet lock

    TRI-Z
    aluminam top mount fuel tank--sold
    DG pipe--sold
    yellow mess vented num plate--sold
    yellow head light--sold

    85-86 ATC250R
    billet intakes with rubber adapter boots for bigger carbs 1 H&S with boost bottle port and 1 POSA
    Selvys exhaust head pipe and silencer
    Selvys Sonic ported 250cc cylinder needs resleeved
    CRF sectional head pipe
    Answer ignition roost boost
    chrome six pack rack
    Hi Flite desert seat, pan foam and new carbon fiber seat cover.
    Hondaline over fender NOS
    near mint 85 and a 86 style head lights complete and working,
    used white rear low pro fenders
    38 mil Kiehn flat slide--sold
    40 mill Kiehn round slide.
    white maire mesh vented num plate with mounts and black nums
    NOS red maire over fender
    West Coast extended Hubs--sold
    ESR pipe--sold


    first gen 200X 83-85
    2 clutch side cases with oil cooler mod done drilled and tapped with brass elbows to oil lines
    real nice clean OEM jugs 2, rocker boxxes 2, heads 3, and cams 2 with no wear
    lockhart oill cooler, lines, and case with mod--sold
    phasefive head pipe and alum silencer--sold
    28 mil intake and matching 28 mil keihen round slide--sold
    85 blue shock WP revalve--sold


    air cooled 250R 81-84
    RPM TURBOED FULL LOBE CRANK. full circle lobes that have been turbo cut
    RPM ported and decked cylinder
    2 DG star burst radial gold anodized heads
    2 mild unknown clean ported jugs
    shaved and stock heads
    billet intakes for bigger carbs and boost bootles
    83-84 full Bassani pipe--sold
    81 DG head pipe--sold

    85-86 ATC350X
    NOS PK Pipe--sold
    3 NOS NASA fork braces--sold
    hondaling headlight gaurd
    nice oem headlight--sold
    +1 Dura Blue swinger--sold
    DG pipe--sold
    ASTRO 4 wheel conversion kit frame

    real nice 1985 ATC250R clean 90% original.. $2000

    1984 ATC70 all original but exact repro black seat cover and a honda chrome headlight kit. real nice, real clean. runs great. one dry cracked rear tire needs replaced.... $800 obo

    1985 ATC70 pit bike.. 110cc auto motor custom kick start to pull start handle conversion, super trapp pipe, custom pit bike pegs and foot brake pedal.. custom grab bar with cooler rack,, bar raisers and baja lights, billet rear view mirrior, carbon fiber seat cover, 2in billet wheel spacers 3 gold anodized rims 16in flat track tires.. nice oem honda fenders and tank., complete custom big kids pit bike,,. wont stay running.. $800 obo

    Old school drag trike.. Aftermarket tubular Nicolson 90 frame, with heavy duty chrome rigid forks.. Mild ported air cooled 250R motor, DG head, Boosen rad valve billet intake 36mil kiehen D slide carb K&N pod, FTZ outta frame drag pipe, 6 foot wheeie bar, 2 piece alum PCCC Turbo wheels with new 4 sows and a new knobbie up front.. custom black and red diamond tuc and roll seat.. one off head turner looks of trick custom parts..... $1500



    I got a lot email me and well talk..


    http://syracuse.craigslist.org/rvs/2441477352.html
    pics at the link! I don't need any of it but figured I should share the ad!
    Quad? whats that?

  2. #2
    Join Date
    Aug 2008
    Location
    OK
    --
    5,450
    It's been posted before. It's Freaksfix off of the site.
    Rides:
    1986 ATC250R (sectional pipe and Klemm Research silencer)
    1986 ATC250R (Desert Bike, WAX-ON seat, Dual Cibie lights, Steering Stabilizer)
    1979 ATC110 (Bandito frame and forks, Turbo wheels, disc braked)
    1982 ATC70 (Lifan manual 125)
    1987 LT80 (piped, widened)


    My feedback thread
    http://www.3wheelerworld.com/showthr...ack-for-dcreel

    RIP Trace.. Godspeed.

  3. #3
    Join Date
    May 2011
    Location
    Foothills of the Adirondacks
    --
    104
    sorry, my bad!
    Quad? whats that?

  4. #4
    Join Date
    Dec 2010
    Location
    Victoria, British columbia Canada / Winnipeg Manitoba, Canada
    --
    845
    i would kill for some of thoses parts....jk
    MY TRIKES! :
    1- 85 250r NOS engine
    1- 1985 350x
    1- 82 250r + Parts
    1- 86 250es Big Red
    1- 85 200x
    2- 84 200es Big Red
    1- 84 200M !!MINTY!!
    1- 73 Atc 70 (project)
    MY Snowmobile's!!
    1999 Polaris Indy 440
    1999 Ski-Doo 583
    1993 Polaris Indy 500
    My Dirt Bike
    1986 Dr100
    AND A SCOOTER!! 1986 Honda Spree

  5. #5
    Join Date
    Aug 2008
    Location
    OK
    --
    5,450
    Quote Originally Posted by Tuff View Post
    sorry, my bad!
    No worries, it was a month ago..

    http://www.3wheelerworld.com/showthr...rts-and-trikes
    Rides:
    1986 ATC250R (sectional pipe and Klemm Research silencer)
    1986 ATC250R (Desert Bike, WAX-ON seat, Dual Cibie lights, Steering Stabilizer)
    1979 ATC110 (Bandito frame and forks, Turbo wheels, disc braked)
    1982 ATC70 (Lifan manual 125)
    1987 LT80 (piped, widened)


    My feedback thread
    http://www.3wheelerworld.com/showthr...ack-for-dcreel

    RIP Trace.. Godspeed.

  6. #6
    Join Date
    Dec 2010
    Location
    Victoria, British columbia Canada / Winnipeg Manitoba, Canada
    --
    845
    i remember seeing this thread before to but who cares if somebody posts it again
    MY TRIKES! :
    1- 85 250r NOS engine
    1- 1985 350x
    1- 82 250r + Parts
    1- 86 250es Big Red
    1- 85 200x
    2- 84 200es Big Red
    1- 84 200M !!MINTY!!
    1- 73 Atc 70 (project)
    MY Snowmobile's!!
    1999 Polaris Indy 440
    1999 Ski-Doo 583
    1993 Polaris Indy 500
    My Dirt Bike
    1986 Dr100
    AND A SCOOTER!! 1986 Honda Spree

  7. #7
    Join Date
    Aug 2008
    Location
    OK
    --
    5,450
    Quote Originally Posted by gomer202 View Post
    i remember seeing this thread before to but who cares if somebody posts it again
    The point I was trying to make was in the hope that we wouldn't have a lot of duplicate posts in this section. I can look to see if things have been posted before so can you.. hopefully.. It doesn't seem like much to ask.
    Rides:
    1986 ATC250R (sectional pipe and Klemm Research silencer)
    1986 ATC250R (Desert Bike, WAX-ON seat, Dual Cibie lights, Steering Stabilizer)
    1979 ATC110 (Bandito frame and forks, Turbo wheels, disc braked)
    1982 ATC70 (Lifan manual 125)
    1987 LT80 (piped, widened)


    My feedback thread
    http://www.3wheelerworld.com/showthr...ack-for-dcreel

    RIP Trace.. Godspeed.

  8. #8
    Join Date
    May 2011
    Location
    eden,ny
    --
    3,482
    Quote Originally Posted by dcreel View Post
    The point I was trying to make was in the hope that we wouldn't have a lot of duplicate posts in this section. I can look to see if things have been posted before so can you.. hopefully.. It doesn't seem like much to ask.
    in a lil less than three years you have posted almost 4300 times I'm betting you posted the same thing more than once. just saying

  9. #9
    Join Date
    Aug 2008
    Location
    OK
    --
    5,450
    Quote Originally Posted by ben6626 View Post
    in a lil less than three years you have posted almost 4300 times I'm betting you posted the same thing more than once. just saying
    I'll bet you're wrong.. If you got the time you go ahead and prove me wrong...

    It amazes me that instead of maybe taking away a little information, they'd rather talk sh!t... If you have to post "just saying", maybe you shouldn't post it..
    Last edited by dcreel; 07-14-2011 at 11:19 PM.
    Rides:
    1986 ATC250R (sectional pipe and Klemm Research silencer)
    1986 ATC250R (Desert Bike, WAX-ON seat, Dual Cibie lights, Steering Stabilizer)
    1979 ATC110 (Bandito frame and forks, Turbo wheels, disc braked)
    1982 ATC70 (Lifan manual 125)
    1987 LT80 (piped, widened)


    My feedback thread
    http://www.3wheelerworld.com/showthr...ack-for-dcreel

    RIP Trace.. Godspeed.

  10. #10
    Join Date
    Aug 2007
    Location
    Moab, UT
    --
    1,807
    Quote Originally Posted by dcreel View Post
    I'll bet you're wrong.. If you got the time you go ahead and prove me wrong...

    It amazes me that instead of maybe taking away a little information, they'd rather talk sh!t... If you have to post "just saying", maybe you shouldn't post it..
    "Just sayin" is a favorite standby term used by newbs. What he meant to say was, "I haven't earned my stripes but I like to pretend I have."
    ADMIRIN' BOOBS AND BLASTIN' NEWBS

  11. #11
    Join Date
    May 2011
    Location
    eden,ny
    --
    3,482
    I wasn't talkin shlt! I know from experience that even searching for something on here you can't always find it even with exact or close to wording. I will however call you out on counterdicting yourself though. "no worrys it was over a month ago" then biltch about posting info that has already been posted? not trying to get anything goin but read what you already wrote before saying something different

  12. #12
    Join Date
    Aug 2008
    Location
    OK
    --
    5,450
    Quote Originally Posted by ben6626 View Post
    I wasn't talkin shlt! I know from experience that even searching for something on here you can't always find it even with exact or close to wording. I will however call you out on counterdicting yourself though. "no worrys it was over a month ago" then biltch about posting info that has already been posted? not trying to get anything goin but read what you already wrote before saying something different
    My point had been made.. You are starting sh!t. Why else would you post. As far as my post count I have about a 1000 other posts in the Tecate Group I started that you joined. It amazes me how much you newbies think you run things here. Why would it be a good idea to have a bunch of the same posts about the same craigslist post? Did you even think of that fact before you started typing? Of course not, it never even occured to you. If you would try to search for what you are posting you might find it. Everyone just keeps getting lazier and lazier.. It's too hard to do a search.. waaahh.. You know from experience... Apparently you don't.. You know more than everyone in 3 months huh??

    This is not your site or mine.. The least we can do is to help police the site ourselves to a point by not taking up space with duplicate threads about the same thing. If you don't understand that concept.. maybe you will in about 2 years and 7 months..
    Rides:
    1986 ATC250R (sectional pipe and Klemm Research silencer)
    1986 ATC250R (Desert Bike, WAX-ON seat, Dual Cibie lights, Steering Stabilizer)
    1979 ATC110 (Bandito frame and forks, Turbo wheels, disc braked)
    1982 ATC70 (Lifan manual 125)
    1987 LT80 (piped, widened)


    My feedback thread
    http://www.3wheelerworld.com/showthr...ack-for-dcreel

    RIP Trace.. Godspeed.

  13. #13
    Join Date
    May 2011
    Location
    Foothills of the Adirondacks
    --
    104
    sorry to cause such a storm. would a moderator please delete this thread?


    dcreel: this newb does not think he runs or owns this site, and has a lot of respect for the membership here, but I do have lots of good info and experience that I bring to the table. not just wheelers but also sleds, and as a GM Master Tech w/25 years experience, I would be happy to help my fellow members with any issues with their vehicles, as well.


    yes, I posted the link without a search because its from NY and I figured there are not too many NY'ers here so I expected it hadn't been posted already.


    I guess with this sites attitude toward newbs, maybe the bold is a waste of my time and I will go back to just reading here as a guest(been reading here for years)and contribute nothing.


    again, I apologize for creating any drama. It was never intended. enjoy.
    Quad? whats that?

  14. #14
    Join Date
    May 2011
    Location
    eden,ny
    --
    3,482
    I'm here to learn and share what I know isnt that what its all about? 3months,3 years I doubt if either of us know all there is to know. and I love the tecate group lots of good info there. My origanal point was its not that hard to make a duplicate thread even after searching. I wasnt trying to take a personal hit at you dcreel so please dont take it that way

  15. #15
    Join Date
    Aug 2008
    Location
    OK
    --
    5,450
    Tuff, I apologize for coming off the way I did. I made a remark to your post, and I figured that was that. I figured the message would have been received. The diatribe afterwards was not pointed at you and I apologize. If everyone would have taken the point I was trying to make and moved on it never would have happened. It just seems like respect is a forgotten art anymore. Especially on an internet forum.

//ArrowChat Integreation Code //