//ArrowChat Code
Results 1 to 2 of 2

Thread: Not sure which engine to use in my new 200x

  1. #1
    Join Date
    Sep 2011
    Location
    Barrie Ontario
    --
    38

    Not sure which engine to use in my new 200x

    I just picked up a 84 200x with a bum motor. Buddy said the motor locked up on a hot day. Its out of the bike now
    Should I rebuild it or try and piece together a 200m motor from my 2 200m parts motors.
    Does anyone have a good used 200x or a 200es chain motor.
    How much is a 200x motor worth.
    1984 200x
    1985 200m
    1984 200s

  2. #2
    Join Date
    Jan 2011
    Location
    Brazil, Indiana
    --
    2,087
    You might as well take the 200x motor apart and see whats stuck. It might be in the top end. Then again the rod might have fused to the crank shaft. It is hard to tell until you get in there and look. I have an extra 200x motor, but I dont know its condition internally. If I were going to buy a used motor and was not planning on rebuilding it, I would make darn sure I could ride it or at least hear it run.
    my feedback thread http://www.3wheelerworld.com/showthr...-hoosierlogger


    TRIKEFEST 11, 12, 13, 14, 15, 16

    Current rides
    Taurus 650 (green)
    85 250es big red
    83 ALT50 (5 year old daughters)
    82 ALT50
    82 ALT50
    84 atc 70 stroked big bore 90 STILL in progress.
    71 QA50
    93 TRX 300 FW

    Quote Originally Posted by fabiodriven View Post
    Ya'll are the biggest bunch of whining b!tches I've seen in my entire life.
    You might be strong as an ox, but without a cart you are just a big dumb animal.

//ArrowChat Integreation Code //